Defender Home Page
Phone: 800-628-8225 Fax: 800-654-1616 Int'l.: 860-701-3400 Email: Contact Us
follow me on facebook
Shipping Info
no sales tax Defender Home Page
Your Cart


View Cart View Shopping Cart
Check My Order(s)
Track My Package(s)
Metric/Inch
Conversion Chart
Categories
Shopping Areas
Information
Boats & Motors
 Defender Seal
 
 

Awlgrip High Build Epoxy Primer

  • Color: Off White
  • Applications: High Build Coats and Filling Required
  • Applications: Above the Waterline Use Only, Container Size: Quart
  • Item #: 
    750734
    Brand: 
    Awlgrip
    Model #: 
    D8002
    Shipping Weight: 
    4.75 Lbs.
    Our Price:
    $48.99
    48.99
    Status:    In Stock

    Quantity:  
     
     

    Warning This product ships ground only

    High Build Epoxy Primer

    AwlGrip is a two component epoxy primer for use where high build and filling is required. Not to be used below the waterline. Best when used as a surfacer over other AwlGrip Primers and Fairing Compounds. High Build primer may be applied directly to properly prepared wood or fiberglass; however, best results are obtained when these surfaces are first sealed with 545 Primer.

    Conventional or airless spray only. Pressure feed equipment is required.

    *** FOR PROFESSIONAL USE ONLY ***

    Specifications:

    • Type: Epoxy Polyamide
    • Packaging: Available in 1 gallon and 1 quart containers
    • Theoretical Coverage: Sq. Feet/Gallon793 Sq. Feet at one mil dry 113-158 Sq. Feet at recommended dry film thickness. Calculated for mixed base and converter reduced 20%.
    • Coverage calculations are based on theoretical transfer efficiency of 100%.
    • Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and environment.
    • Recommended Wet Film Thickness: 8-10 mils (200-250 microns)
    • Recommended Dry Film Thickness: 5-7 mils (125-175 microns)
    • Recoatability: With itself, 4 hours; with other products, 12-24 hours. Maximum without sanding: 24 Hours.
    • Sanding before overcoating with other products is recommended.
    • May be overcoated with 545 Epoxy Primer, ULTRA-BUILD, Sprayable Fairing Compound, AWL-FAIR L.W., and AWL-QUIK.
    • VOC: White Base D8002 - 347 g/lt or 2.9 lbs/gal. Yellow Base D9002 - 338 g/lt or 2.8 lbs/gal

    Surface Preparation

    Best when used as a surfacer over other Awlgrip primers and fairing compounds. May be applied directly to properly prepared wood or fiberglas, however best results are obtained when these surfaces are first sealed with 545 Primer.

    • Gelcoat/Fiberglass: sand with 100-150 grit paper.
    • Wood: Smooth sand with 80-100 grit paper.

    Mixing and Reduction

    • Mix by volume one part base with one part converter to a smooth homogenous mixture.
    • Induction time after mixing: 15 minutes.
    • Reduce 10-20% with appropriate reducer.
    • Anticipated Pot Life time at 77 F/50 relative humidity is 8 hours.
    • Higher temperatures may shorten pot life.

    Application Instructions

    Spray: Apply Awl-Grip High Build Epoxy Primer in even coats of 8 to 10 mils (200-250 microns) wet film thickness yielding 4 - 5 mils (100 to 125 microns) DFT. Two to three coats may be needed.

    Note: Do not apply to surfaces warmer than 105 F or colder than 55 F. Do not attempt to cure products at temperatures below 55 F. Do not apply to surfaces less than 3 C or 5 F above Dew Point or to surfaces warmer than 41 C/105 F. Ambient temperatures should be 13 C/55 F - 41 C/105 F.

     
    WARNING: This product MAY expose you to chemicals, which are known to the State of California to cause cancer, birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov



      


    Awlgrip High Build Epoxy Converter
    Item #: 750694
  • Applications: Awlgrip High Build Epoxy Primer (Sold Separately)
  • Container Size: Quart
  •  Include

    $49.99
    Model #:
    D3002
     
     
     

    Have A Suggestion?


    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.

    Product has been improperly categorized
    Page loads too slowly
    Product information is incorrect
    Page has errors or bugs
    Site is frustrating or difficult to use
    Product image is missing or wrong
    Cannot find my size
    Spelling errors on page
    Not enough product information

    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

    Please include your e-mail address below if you would like us to respond to your comments or questions.             





       
    Join Our Email List And Receive our Monthly Promotions
    Defender Email Specials
    Click Here For Our Privacy Policy