Awlgrip 545 Epoxy Primer BaseColor: Gray Base - Quart

  • Function: Primer Only (D3001 Activator, and Reducers Sold Separately)
  • Color: Gray Base,
  • Applications: Above the Waterline Use Only, Container Size: Quart
  • Item #: 
    990054
    Brand: 
    Awlgrip
    Model #: 

    D1001

    Packaged Weight: 
    3.35 Lbs.
    Our Price:
    $43.99
    990054
    Awlgrip 545 Epoxy Primer BaseColor: Gray Base - Quart D1001

    Awlgrip 545 Epoxy Primer - Gray Base (D1001) is a 2-part, multi-use epoxy primer used to seal filler primers and fairing work before applying topcoats. This primer may be used above and below the waterline and can be applied by spray, brush, or roller.

    Features

    • Can be used to seal filler primers and fairing work before applying topcoats
    • Gives an ideal undercoat for all Awlgrip topcoats
    • Fast overcoating times
    • Two component epoxy primer
    • Corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates
    • May be applied by spray, brush, or roller
    • May be used above or below the waterline

    Note: This multi-component system is intended for experienced painters. Please read mixing and application instructions thoroughly prior to starting project to ensure best results.

    Surface Preparation


    • Aluminum: Sandblast or grind to 100% clean silver color or treat with Alumiprep 33 or Alodine 1201
    • Steel: Sandblast/grind SSPC-SP5-85 or Sa 2 1/2
    • Gelcoat/Fiberglass: Sand with 100-150 grit paper
    • Wood: Smooth sand with 80-100 grit paper.

    Mixing and Reduction

    Spray: Mix by volume one part 545 base with one part D3001 to a smooth homogenous mixture. Reduce up to 25% with T0003. Overall mix is 1:1 1/2 by volume. Example: 8 oz. 545 base, 8 oz. D3001, 4 oz. T0006.

    Brush/Roll: Reduce 5-10% with T0031. Below 75° F you may use Cold Cure Accelerator M3066 to maintain dry and cure times. Anticipated Pot life at 77° F and 50% relative humidity is 16 hours.

    Application Instructions
    Spray Application: Apply smooth, wet coats to fill and cover surface profile. Two to 3 may be needed at 5 - 6.5 mils WFT yielding 2-3 mils DFT.

    Brush and Roller Application: Apply 2 coats at 3-4 mils WFT yielding 1.0 - 1.5 DFT per coat. Allow 12-14 hrs. between coats. Light sanding between coats will improve appearance. For large surfaces rolling, then tipping with a brush is preferred. Do not apply paint materials to surfaces warmer than 105° F or colder than 55° F. Do not attempt to cure products at temperatures below 55° F.

    Warning: Do not apply paint materials to surfaces less than 3° C or 5° F above dew point or to surfaces warmer than 41° C or 105° F. Ambient temp should be a minimum 13° C / 55° F and max 41° C or 105° F.

    Specifications:

    • Type: Epoxy polyamide
    • Color: Gray
    • Size: 1 Quart
    • Theoretical Coverage (Sq. Feet/Gallon)
      • 298 sq. ft. at one mil dry
      • 198-496 sq. ft. at recommended dry film thickness
      • Calculated for mixed base and converter reduced 50%
    • Coverage calculations are based on theoretical transfer efficiency of 100%
    • Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and environment
    • Recommended Wet Film Thickness: 7-10 mils (175-250 microns)
    • Recommended Dry Film Thickness: 2-3 mils (50-75 microns)
    • Application Methods: Sprayer, roller, or brush
    • Number of Coats: 3
    • Recoating Times:
      • At 77° F / 50% R.H., minimum 2-4 hours
      • Maximum window without sanding: 24 hours
    • Sanding before overcoating with other products is recommended
    • May be overcoated with AWLGRIP/AWLCRAFT 2000 Topcoats, 545 Epoxy Primer, High Build Epoxy Primer, AWL-QUIK Sanding Surfacer, and ULTRA-BUILD Epoxy Primer
    • VOC: Gray Base - 435 g/lt or 3.6 lbs./gal. Converter 616 g/lt or 5.1 lbs./gal
    Awlgrip 545 Epoxy Primer BaseColor: Gray Base - Quart
    43.99
    Status:   In Stock

    WarningThis product ships ground only

    Awlgrip 545 Epoxy Primer - Gray Base (D1001) is a 2-part, multi-use epoxy primer used to seal filler primers and fairing work before applying topcoats. This primer may be used above and below the waterline and can be applied by spray, brush, or roller.

    Features

    • Can be used to seal filler primers and fairing work before applying topcoats
    • Gives an ideal undercoat for all Awlgrip topcoats
    • Fast overcoating times
    • Two component epoxy primer
    • Corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates
    • May be applied by spray, brush, or roller
    • May be used above or below the waterline

    Note: This multi-component system is intended for experienced painters. Please read mixing and application instructions thoroughly prior to starting project to ensure best results.

    Surface Preparation


    • Aluminum: Sandblast or grind to 100% clean silver color or treat with Alumiprep 33 or Alodine 1201
    • Steel: Sandblast/grind SSPC-SP5-85 or Sa 2 1/2
    • Gelcoat/Fiberglass: Sand with 100-150 grit paper
    • Wood: Smooth sand with 80-100 grit paper.

    Mixing and Reduction

    Spray: Mix by volume one part 545 base with one part D3001 to a smooth homogenous mixture. Reduce up to 25% with T0003. Overall mix is 1:1 1/2 by volume. Example: 8 oz. 545 base, 8 oz. D3001, 4 oz. T0006.

    Brush/Roll: Reduce 5-10% with T0031. Below 75° F you may use Cold Cure Accelerator M3066 to maintain dry and cure times. Anticipated Pot life at 77° F and 50% relative humidity is 16 hours.

    Application Instructions
    Spray Application: Apply smooth, wet coats to fill and cover surface profile. Two to 3 may be needed at 5 - 6.5 mils WFT yielding 2-3 mils DFT.

    Brush and Roller Application: Apply 2 coats at 3-4 mils WFT yielding 1.0 - 1.5 DFT per coat. Allow 12-14 hrs. between coats. Light sanding between coats will improve appearance. For large surfaces rolling, then tipping with a brush is preferred. Do not apply paint materials to surfaces warmer than 105° F or colder than 55° F. Do not attempt to cure products at temperatures below 55° F.

    Warning: Do not apply paint materials to surfaces less than 3° C or 5° F above dew point or to surfaces warmer than 41° C or 105° F. Ambient temp should be a minimum 13° C / 55° F and max 41° C or 105° F.

    Specifications:

    • Type: Epoxy polyamide
    • Color: Gray
    • Size: 1 Quart
    • Theoretical Coverage (Sq. Feet/Gallon)
      • 298 sq. ft. at one mil dry
      • 198-496 sq. ft. at recommended dry film thickness
      • Calculated for mixed base and converter reduced 50%
    • Coverage calculations are based on theoretical transfer efficiency of 100%
    • Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and environment
    • Recommended Wet Film Thickness: 7-10 mils (175-250 microns)
    • Recommended Dry Film Thickness: 2-3 mils (50-75 microns)
    • Application Methods: Sprayer, roller, or brush
    • Number of Coats: 3
    • Recoating Times:
      • At 77° F / 50% R.H., minimum 2-4 hours
      • Maximum window without sanding: 24 hours
    • Sanding before overcoating with other products is recommended
    • May be overcoated with AWLGRIP/AWLCRAFT 2000 Topcoats, 545 Epoxy Primer, High Build Epoxy Primer, AWL-QUIK Sanding Surfacer, and ULTRA-BUILD Epoxy Primer
    • VOC: Gray Base - 435 g/lt or 3.6 lbs./gal. Converter 616 g/lt or 5.1 lbs./gal
     
    Awlgrip 545 Epoxy Primer BaseColor: White Base - Quart
    Item #: 751369
  • Function: Primer Only, (D3001 Activator, and Reducers Sold Separately)
  • Color: White Base
  • Applications: Above or Below Waterline Use , Container Size: Quart
  •  
    Awlgrip-545-Epoxy-Primer-BaseColor:-White-Base-Quart
    Our Price: $43.99
    Model #: D8001
    Awlgrip 545 Epoxy Primer Converter - Quart
    Item #: 751372
  • Applications: Awlgrip 545 Epoxy Primer Base (Sold Separately)
  • Part One of a Two-Part System
  • Container: Quart
  •  
    Awlgrip-545-Epoxy-Primer-Converter-Quart
    Our Price: $41.99
    Model #: D3001
    Awlgrip Standard Epoxy Spray Reducer - Quart
    Item #: 756914REDQUA
  • Applications: Spray Applied Awlgrip 545 Epoxy Primer
  • Function: Keeps Paint Film Open with Normal Drying and Dust Free Time
  • Temperature Range: 70° F to 99° F, Container Size: Quart
  •  
    Awlgrip-Standard-Epoxy-Spray-Reducer-Quart
    Our Price: $21.99
    Model #: T0006
    Awlgrip Brushing Reducer - Brushing Applications - Quart
    Item #: 756915REDQUA
  • Applications: Brush Applied Awlgrip Top Coats, 545 Epoxy Primer and Awlquick
  • Function: Evaporates Very Slowly Maximizing Flow and Leveling
  • Temperature Range: 60° F to 90° F, Container Size: Quart
  •  
    Awlgrip-Brushing-Reducer-Brushing-Applications-Quart
    Our Price: $27.99
    Model #: T0031
    Awlgrip Cold Cure Primer Accelerator
    Item #: 755416
  • Applications: Spray Applied Awlgrip 545 Epoxy Primer
  • Function: Reduces Cure / Recoat Times by as much as 50%
  • Container Size: Pint
  •  
    Awlgrip-Cold-Cure-Primer-Accelerator
    Our Price: $27.99
    Model #: M3066
    Scroll to Top of Page