Go Power! Transfer Switch - Pre-Wired
Go Power! Transfer Switch - Pre-Wired
Go Power! Transfer Switch - Pre-Wired

Go Power! Transfer Switch - Pre-Wired

  • Type: Transfer Relay, System: 30 Amp, Power: 120 Volt AC
  • Automatic Switching between 2 Separate 120 Volt AC Inputs
  • Allows both Inverter and Shore Power to Alternatively Feed Circuits
  • Item #: 
    257681
    Brand: 
    Go Power
    Model #: 

    GP-TS

    Packaged Weight: 
    0.60 Lbs.
    List Price: 
    $470.00
    $375.99
    257681
    Go Power! Transfer Switch - Pre-Wired GP-TS

    Go Power! Pre-Wired Transfer Switch allows both inverter and shore power to alternatively feed circuits.

    Features:

    • Two-pole 30 Amp AC Switch that automatically connects shore power (when available)
    • If you unplug from shore power, it then connects your inverter
      output to power your circuits
    • Includes a cable with built-in plug to connect the inverter output
    • Includes a receptacle that powers your converter only when shore power is available

    Installation:

    1. Ensure the shore power plug is not connected to shore power and batteries are disconnected
    2. Connect the RV shore power cord to Go Power! Transfer Switch input: wires are labeled "Shore Hot"
      and "Shore Neutral". Connect ground wire to provided ground bonding block
    3. Connect transfer switch output to AC power panel. (Use terminals labeled "AC Panel")
    4. Plug supplied inverter power cord into inverter. (With inverter power switch "off" or disconnect inverter
      from the battery.)
    5. Plug Go Power! Battery Charger into transfer switch female outlet and connect to batteries. (When
      using a stock converter charger, remove the AC connections from the breaker panel and add a male
      plug to connect with the transfer switch female outlet.)
    6. Disable converter when using a stand-alone charger
    Go Power! Transfer Switch - Pre-Wired
    375.99
    Status:   Backordered
    Note: This item will ship when available.

    Add Item to Cart to See Sale Price

    Go Power! Pre-Wired Transfer Switch allows both inverter and shore power to alternatively feed circuits.

    Features:

    • Two-pole 30 Amp AC Switch that automatically connects shore power (when available)
    • If you unplug from shore power, it then connects your inverter
      output to power your circuits
    • Includes a cable with built-in plug to connect the inverter output
    • Includes a receptacle that powers your converter only when shore power is available

    Installation:

    1. Ensure the shore power plug is not connected to shore power and batteries are disconnected
    2. Connect the RV shore power cord to Go Power! Transfer Switch input: wires are labeled "Shore Hot"
      and "Shore Neutral". Connect ground wire to provided ground bonding block
    3. Connect transfer switch output to AC power panel. (Use terminals labeled "AC Panel")
    4. Plug supplied inverter power cord into inverter. (With inverter power switch "off" or disconnect inverter
      from the battery.)
    5. Plug Go Power! Battery Charger into transfer switch female outlet and connect to batteries. (When
      using a stock converter charger, remove the AC connections from the breaker panel and add a male
      plug to connect with the transfer switch female outlet.)
    6. Disable converter when using a stand-alone charger

    Scroll to Top of Page