Hayn Lifeline Deck Toggle Jaw (38TJLL14)
Hayn Lifeline Deck Toggle Jaw (38TJLL14)
Hayn Lifeline Deck Toggle Jaw (38TJLL14)

Hayn Lifeline Deck Toggle Jaw (38TJLL14)

  • Wire Size: 1/4", Pin Size: 3/8"
  • Swivel: 0 to 180 Degrees
  • Type: Machine Swage Fitting, Material: 316 Stainless Steel
  • Item #: 
    612816
    Brand: 
    Hayn
    Model #: 

    38TJLL14

    Packaged Weight: 
    0.25 Lbs.
    List Price: 
    $33.86
    Our Price:
    $24.99
    612816
    Hayn Lifeline Deck Toggle Jaw (38TJLL14) 38TJLL14

    The Hayn's Lifeline Deck Toggle Jaw allows for 180 degrees of un-obstructed swivel movement, perfect for wires 1/4" in diameter.

    Features:

    • Cone is longer than comparable fittings currently available
      • Spreads the load over a longer portion of the wire, as well as increases the compressive forces inside the fitting
      • Hayn has increased the number of slots on the cones to allow for a more even transfer of the load throughout the wire
      • Cone is made from stainless steel, so it is not required to replace the cone upon inspection and/or re-use
        • Hayn doesn't recommend the use of sealant in the fitting
    • Use a crown thrust ring to assure even spacing of the wire around the cone
      • With the use of this crown thrust ring, there's no need to bend the wire around the top of the cone to achieve the proper seating depth of the cone in the body
    • Combination greatly increases a fitting's ability to handle fatigue, a critical component of any rigging part
    • Without bending the end of the wire, they are also able to greatly reduce the galling problem inherent in these fittings
    Hayn Lifeline Deck Toggle Jaw (38TJLL14)
    24.99
    Status:    Backordered
    Note: This item will ship when available.

    See the Complete Catalog of Hayne Products - We will Special Order any item that we do not stock

    The Hayn's Lifeline Deck Toggle Jaw allows for 180 degrees of un-obstructed swivel movement, perfect for wires 1/4" in diameter.

    Features:

    • Cone is longer than comparable fittings currently available
      • Spreads the load over a longer portion of the wire, as well as increases the compressive forces inside the fitting
      • Hayn has increased the number of slots on the cones to allow for a more even transfer of the load throughout the wire
      • Cone is made from stainless steel, so it is not required to replace the cone upon inspection and/or re-use
        • Hayn doesn't recommend the use of sealant in the fitting
    • Use a crown thrust ring to assure even spacing of the wire around the cone
      • With the use of this crown thrust ring, there's no need to bend the wire around the top of the cone to achieve the proper seating depth of the cone in the body
    • Combination greatly increases a fitting's ability to handle fatigue, a critical component of any rigging part
    • Without bending the end of the wire, they are also able to greatly reduce the galling problem inherent in these fittings

    Scroll to Top of Page