Jabsco Original Brass Hand Pump

  • Capacitiy: 7 Strokes per Gallon, Use: Water, Oil, Diesel (Not for Gasoline)
  • Dimensions: 22-1/2" L x 1-3/4" Dia.
  • Hose Connection: 1"
  • Item #: 
    500798
    Brand: 
    Jabsco
    Model #: 

    33745-0000

    Packaged Weight: 
    3.30 Lbs.
    Our Price:
    $279.99
    500798 Jabsco Jabsco Original Brass Hand Pump 33745-0000

    Features:

    • Jabsco Utility Hand Pumps pump more liquid with less effort
    • They never need coaxing or priming and give full suction on the first stroke
    • Pumps can be used in any position
    • Applications: Bilge pumping, oil draining, diesel fuel transfer, and many other liquid transfer applications
    • Jabsco Utility Hand Pumps use long life brass cylinders, high-quality oil resistant plungers, intake and discharge caps

    Note: Oil temperature should not exceed 140° F

    Explosion hazard. Do not pump gasoline, solvents, thinners or other flammable liquids. To do so can cause an explosion resulting in injury or death.

    Specifications:

    • Strokes per Gallon: 7
    • Cylinder Diameter: 1-3/4"
    • Stroke Length: 14"
    • Overall Length: 22-1/2"
    • Hose Connection: 1"
    • Weight: 4.0

    Maintenance

    • To disassemble pump for cleaning and repair, pull handle out approximately 4" and place screwdriver carefully under bottom of spout cap and over outside of cylinder roll
    • Lift up on screwdriver and pry off spout cap. Pull out plunger shaft assembly
    • Lift full floating plunger off seat and clean between cup and seat
    • Remove intake cap in same way as spout cap
    • Take disc valve from cylinder and clean under neoprene flapper
    • Run rag through cylinder for cleaning
    • To reassemble pump, place disc valve in cylinder, snap intake cap back onto cylinder being sure undercut in cap is over cylinder roll
    • Insert plunger shaft assembly into cylinder and snap spout cap over cylinder roll
    • Oil pump internally and coat exterior of brass cylinder with corrosion inhibitor or light oil for storage.
    Jabsco Original Brass Hand Pump
    279.99
    Status:  null In Stock

    Features:

    • Jabsco Utility Hand Pumps pump more liquid with less effort
    • They never need coaxing or priming and give full suction on the first stroke
    • Pumps can be used in any position
    • Applications: Bilge pumping, oil draining, diesel fuel transfer, and many other liquid transfer applications
    • Jabsco Utility Hand Pumps use long life brass cylinders, high-quality oil resistant plungers, intake and discharge caps

    Note: Oil temperature should not exceed 140° F

    Explosion hazard. Do not pump gasoline, solvents, thinners or other flammable liquids. To do so can cause an explosion resulting in injury or death.

    Specifications:

    • Strokes per Gallon: 7
    • Cylinder Diameter: 1-3/4"
    • Stroke Length: 14"
    • Overall Length: 22-1/2"
    • Hose Connection: 1"
    • Weight: 4.0

    Maintenance

    • To disassemble pump for cleaning and repair, pull handle out approximately 4" and place screwdriver carefully under bottom of spout cap and over outside of cylinder roll
    • Lift up on screwdriver and pry off spout cap. Pull out plunger shaft assembly
    • Lift full floating plunger off seat and clean between cup and seat
    • Remove intake cap in same way as spout cap
    • Take disc valve from cylinder and clean under neoprene flapper
    • Run rag through cylinder for cleaning
    • To reassemble pump, place disc valve in cylinder, snap intake cap back onto cylinder being sure undercut in cap is over cylinder roll
    • Insert plunger shaft assembly into cylinder and snap spout cap over cylinder roll
    • Oil pump internally and coat exterior of brass cylinder with corrosion inhibitor or light oil for storage.
    CA Prop65 warning

    Customer Service Why Buy from Defender?
    null
    Scroll to Top of Page