Kover Klamps End Plugs - 25-Pack
10 LEFT!
Buy Now While this Item is Still Available!

Kover Klamps End Plugs - 25-Pack

  • Applications: 3/4" Inside-Diameter EMT (Electrical Metallic Tubing)
  • Function: Seals Open Ends of Tubing to Help Prevent Condensation Inside
  • Material: Plastic, (25) per Pack
  • Item #: 
    753244
    Brand: 
    Kover Klamps
    Model #: 

    EP 700

    Packaged Weight: 
    0.10 Lbs.
    Our Price:
    $6.99
    753244
    Kover Klamps End Plugs - 25-Pack EP 700

    Features:

    • Kover Klamps End Plugs
    • Function: Seals open ends of tubing to help prevent condensation inside
    • Applications: 3/4" Inside-Diameter EMT (Electrical Metallic Tubing)
    • (25) Per Package

    Installation Instructions:

    Frames for Outboards and I/O Runabouts:

    1. Assemble a centerline ridgepole bow to stern
    2. Extend tubing end-to-end with couplings as needed
    3. Attach ridgepole ends to bow and stern pulpits with Kover Klamps
    4. Support ridgepole vertically with short lengths, using rubber tips to prevent chafing deck
    5. Use rubber tips at ends or rest on deck, using Kover Klamps to attach to rails or stanchions
    6. Use extra rib leg to raise ribs above windshield

    Frames for Sailboats:

    1. Assemble a centerline ridgepole, bow to stern
    2. Extend tubing end-to-end with couplings as needed
    3. Attach ridgepole ends to bow and stern pulpits with Kover Klamps
    4. Support ridgepole vertically with short lengths, using rubber tips to prevent chafing deck
    5. Bend 10-foot lengths of tubing in the center to desired angle to create ribs and attach to rails or stanchions with Kover Klamps
    6. Attach ribs to ridgepole with Kover Klamps
    7. Extend ribs downward to deck with short lengths of tubing, using rubber tips to prevent chafing
    8. Create "pocket braces" with longitudinal lengths of tubing on either side of ridge to prevent cover from sagging between the ribs

    Frames for Cruisers:

    1. Assemble a centerline ridgepole, bow to stern
    2. Extend tubing end-to-end with couplings as needed
    3. Use tubing bender to contour the ridgepole over the windshield and flybridge. as well as cabin
    4. Attach ridgepole ends to bow and stern pulpits with Kover Klamps
    5. Support ridgepole vertically with short lengths, using rubber tips to prevent chafing deck
    6. Bend 10-foot lengths of tubing in the center to the desired angle; Klamp ribs to ridgepole, spacing ribs evenly every 4 to 5 ft
    7. Stanchions will indicate how many ribs to create
    8. Extend ribs downward to deck with short lengths of tubing, using rubber tips to prevent chafing
    9. Create "pocket braces' with longitudinal lengths of tubing on either side of ridge to prevent cover from sagging between the ribs

    Kover Klamps End Plugs - 25-Pack
    6.99
    Status:   In Stock

    Features:

    • Kover Klamps End Plugs
    • Function: Seals open ends of tubing to help prevent condensation inside
    • Applications: 3/4" Inside-Diameter EMT (Electrical Metallic Tubing)
    • (25) Per Package

    Installation Instructions:

    Frames for Outboards and I/O Runabouts:

    1. Assemble a centerline ridgepole bow to stern
    2. Extend tubing end-to-end with couplings as needed
    3. Attach ridgepole ends to bow and stern pulpits with Kover Klamps
    4. Support ridgepole vertically with short lengths, using rubber tips to prevent chafing deck
    5. Use rubber tips at ends or rest on deck, using Kover Klamps to attach to rails or stanchions
    6. Use extra rib leg to raise ribs above windshield

    Frames for Sailboats:

    1. Assemble a centerline ridgepole, bow to stern
    2. Extend tubing end-to-end with couplings as needed
    3. Attach ridgepole ends to bow and stern pulpits with Kover Klamps
    4. Support ridgepole vertically with short lengths, using rubber tips to prevent chafing deck
    5. Bend 10-foot lengths of tubing in the center to desired angle to create ribs and attach to rails or stanchions with Kover Klamps
    6. Attach ribs to ridgepole with Kover Klamps
    7. Extend ribs downward to deck with short lengths of tubing, using rubber tips to prevent chafing
    8. Create "pocket braces" with longitudinal lengths of tubing on either side of ridge to prevent cover from sagging between the ribs

    Frames for Cruisers:

    1. Assemble a centerline ridgepole, bow to stern
    2. Extend tubing end-to-end with couplings as needed
    3. Use tubing bender to contour the ridgepole over the windshield and flybridge. as well as cabin
    4. Attach ridgepole ends to bow and stern pulpits with Kover Klamps
    5. Support ridgepole vertically with short lengths, using rubber tips to prevent chafing deck
    6. Bend 10-foot lengths of tubing in the center to the desired angle; Klamp ribs to ridgepole, spacing ribs evenly every 4 to 5 ft
    7. Stanchions will indicate how many ribs to create
    8. Extend ribs downward to deck with short lengths of tubing, using rubber tips to prevent chafing
    9. Create "pocket braces' with longitudinal lengths of tubing on either side of ridge to prevent cover from sagging between the ribs


    Kover Klamps Slide Locks
    Item #: 753240
  • Applications: 3/4" Inside-Diameter EMT (Electrical Metallic Tubing)
  • Function: Prevents Vertical Kover Klamps from Sliding, Increases Support
  • Material: Heavy Gauge, Steel Zinc-Plated Clamping Device, Sold (5) per Package
  •  

    Our Price: $12.99
    Model #: SSL 205
    Kover Klamps
    Item #: 753238
  • Applications: 3/4" Inside-Diameter EMT (Electrical Metallic Tubing)
  • Function: Easily Build a Custom Boat Cover Frame, Clamps Tubing to Tubing
  • Material: Heavy Gauge, Steel Zinc-Plated Clamping Device, Sold (5) per Package
  •  

    Our Price: $24.99
    Model #: K 600
    Kover Klamps Protector Pads - 2-Pack
    Item #: 753242
  • Applications: Placed Over Kover Klamps to Protect Cover from Chafing
  • Function: Reduces Wear on Cover at Kover Klamp Frame Locations
  • Material: Rubber Pads, Sold (2) per Package
  •  

    List Price: $7.99
    Closeout Price: $5.00
    Model #: RP 400
    Kover Klamps Color Code Frame Labeling System
    Item #: 753243
  • Applications: Helps Reassemble Kover Klamp Frames
  • Function: Gives each Part of the Frame a Specific Color ID and Number
  • Material: Vinyl, Peel and Stick Labels
  •  

    List Price: $19.99
    Closeout Price: $12.00
    Model #: CCS 500
    Scroll to Top of Page