Item #875949

Navico V3100 Class-B AIS/GPS 500 - 000-14380-001

Image of : Navico V3100 Class-B AIS/GPS 500 - 000-14380-001 Navico V3100 Class-B AIS/GPS 500 - 000-14380-001 Item # 875949

Description

The V3100 Class B AIS is designed to meet the needs of vessels operating in high-traffic areas. It incorporates SOTDMA technology and increased output power to provide improved transmission reliability and range in a cost-effective package for vessels that require greater performance than standard Class B AIS, but do not require a full Class A solution.

Features:

  • Enhanced performance compared to standard Class B AIS
  • Transmit over greater distances with 5-Watt output power
  • Transmit more frequent position updates with SOTDMA
  • Greater transmission reliability in high-traffic areas
  • Integrated 'black-box' solution
  • NMEA 2000®, dual NMEA 0183®, and USB connectivity
  • IP67 water-resistant housing
  • Built-in SD card slot for AIS data logging
  • Ideal for use with Simrad GO, NSS, NSO and B&G Vulcan and Zeus series displays

VHF Transponder

  • Frequency Range: 156.025 MHz ~ 162.025 MHz
  • Access Scheme: SOTDMA
  • Channel Bandwidth: 25 KHz
  • Modulation: GMSK / FM
  • Data Rate: 9,600 bps
  • Number of AIS Transmitters: 1
  • Number of AIS Receivers: 2 (one time-shared between AIS and DSC)
  • Number of DSC Receivers: 1 (time-shared between AIS and DSC)
  • AIS Channel 1: CH 87B (161.975 MHz)
  • AIS Channel 2: CH 88B (162.025 MHz)
  • Tx Power Output: 5W (37 dBm ± 1.5 dB): 1W (30 dBm ± 1.5 dB)
  • Rx Sensitivity: < -107 dBm @ 20% PER
  • Rx Message Format: AIS Class A & B messages

DSC Receiver

  • Modulation: 1,300 Hz / 2,100 Hz FSK
  • Accuracy: 1,200 bps ± 30 ppm
  • Spurious Response Rejection: = 70 dB for signal @ -104 dBm; BER = 1 %
  • Blocking: = 84 dB for signal @ -104 dBm; BER =1 %

GNSS Receiver (Integrated)

  • Receiving Channels: 50 channels
  • Accuracy: IEC 61108-1 compliant
  • Output Rate: 1 Hz
  • Support GPS, Galileo, Beidou, GLONASS

Power Supply

  • Supply Voltage: 12V / 24V DC / 3 Amp
  • Power Consumption: Typically less than 3W average @ 12V DC

Connection Interface

  • GPS Antenna Connector: Adaptor to SMA (incl. in box)
  • VHF Antenna Connector: SO-239 (Female)
  • NMEA 2000: Micro-C standard connector
  • NMEA 0183 (RS-422): Support two NMEA 0183 interfaces. Default baud rate 38,400 & 4,800 bps. Configurable and separate Tx/Rx baud rate. Standard IEC 61162-1 / IEC 61162-2 sentences
  • Silent Mode Setting: Set by dedicated pins in the 12-pin cable or by NMEA 2000 from Navico MFD
  • Internal Alarm Relay Setting: Set by dedicated pins in the 8-pin cable
  • USB: Mini-B type, waterproof

Environmental

  • Operating Conditios: IEC 60945 "protected" category
  • Operating Temperature: 5° F ~ 130° F (-15° C ~ +55° C)
  • Waterproof: IP67

Physical

  • Width: 6.97 inches (177 mm)
  • Height: 2.36 inches (60 mm)
  • Depth: 5.20 inches (132 mm) (excluding connector)
  • Weight: 1.6 lbs (500 g)

Compass Safety Distance

  • Standard Magnetic Compass: 1 foot (0.3 m)
  • Steering Magnetic Compass: 1 foot (0.3 m)

GPS-500 Antenna

  • Cable: Integral 10 m RG-174 cable plus mounting bracket
  • Supply Voltage: 3.3V

In the Box:

  • Simrad V3100 Class B AIS
  • GPS-500: GPS antenna

Owner's Manual and Installation Guide (3.08 MB)

Part Numbers for Navico V3100 Class-B AIS/GPS 500 - 000-14380-001

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 35.33ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 64.96ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;