Oceanic Systems NMEA 2000 Volumetric Water Tank Volume / Level Sender
Multiple Sizes Available
In the Box:
- Sending Unit
- End Cap
- User Manual
The Oceanic Systems NMEA2000 Volumetric Water Tank Volume / Level Sender (3281) will measure the water level in the fresh water tanks. They provide a ±2% accurate tank level to the NMEA2000® marine network.
The 3281 can be programmed with up to 100 volumetric points so that it offers the most accurate indication of the volume of water in the tank. This volume information can then be displayed on any NMEA2000® enabled display wherever it is required. It is robustly constructed in stainless steel with no moving parts to stick or fail in service.
It is available to suit tank depths from 250mm to 2 meters. Up to 16 senders can be connected to a single network and the tank number is simply selectable at installation by means of the small rotary switch.
It is manufactured to the NMEA2000® network standard and attaches to the network using a single "Micro" plug. It draws less than 50mA from the network.
- High ±2% Accuracy
- No moving parts to stick or fail
- Tank Depths from 250 mm to 2 meter
- Up to 16 of each type of sender on a single network
- Low Top Profile
- Easy to Install
- Robust Stainless Steel Construction NMEA2000® Certified
For further details see Installation Guide
For further details see Product Data Sheet
For further details see Calibration Form
- Dimensions: 2.5" (Ø63 mm) x 1.34" (34 mm) D
- Thread Mounted: 1.5" NPT
- Waterproof: IP67
- Power: NMEA 2000 Micro Plug
- Power Consumption: <50mA
- Operating voltage: 9-16 volts DC
- 3800 Network Started Kit
- 3350-W Panel Gauge
- 5250-W Deck Gauge
Additional Handling Note:
Most carriers include an additional handling fee which is included in your shipping rate