Defender Home Page
Call or email to speak with our In-House Technical Staff/Advisors
Phone: 800-628-8225 Int'l.: 860-701-3400 Email: Contact Us
Follow us on Facebook
Shipping Info
Defender Home Page
Your Cart
null
null
null View Cart View Shopping Cart
null Check My Order(s)
null Track My Package(s)
Metric/Inch
Conversion Chart
Categories
Shopping Areas
Information
Boats & Motors
space separator Defender Seal space separator
promo A
promo B
promo C
promo D
 
null
null
null
Raymarine Follow-On Tiller Controller for Evolution Autopilots
 

Raymarine Follow-On Tiller Controller for Evolution Autopilots

  • Applications: Raymarine Evolution Autopilot Systems (Powerboats Only)
  • Power Supply: 12 Volt DC Via SeaTalkng, Mount: Flat, Rigid Surface
  • Fully Waterproof, Up to (4) Follow-On Tillers can be Installed
  • Item #: 
    261513
    Brand: 
    Raymarine
    Model #: 

    A80532

    Packaged Weight: 
    2.00 Lbs.
    List Price: 
    $599.99
    Our Price:
    $532.99
    261513 Raymarine Raymarine Follow-On Tiller Controller for Evolution Autopilots A80532

    Package Includes:

    • Follow On Tiller Controller
    • Keymat
    • Outer Bezel
    • 1 meter STNG interconnect cable (A06080)
    • Mounting Hardware
    • Rotary Lever Installation Guide and Documentation kit

    Features:

    • The Raymarine Follow-On Tiller brings fully functional power steering to remote and secondary control stations anywhere onboard
    • Applications: Raymarine Evolution Autopilot Systems installed on powerboats only
      • Raymarine Evolution Autopilot Systems setup with any powerboat profile, which enables access to Power Steer mode
      • It is not compatible with Evolution wheel drive, tiller drive, or linear drive systems configured for sailing vessels
    • Designed for cruising yachts or commercial vessels, the Follow-On Tiller is a simple add-on control unit for Raymarine Evolution autopilot systems
    • With a single button press, the tiller activates Evolution's Power Steer mode, enabling captains to send precise steering angle commands to the rudder, up to 35°
    • The Follow-On Tiller can be installed at bridge wing stations, aft docking stations, or even into the arms of pilothouse helm chairs
      • Designed for surface mount installation into any flat, rigid surface
      • Fully waterproof for above or below-decks mounting
    • Up to (4) Follow-On Tillers can be installed onboard the vessel enabling control from multiple locations
    • Installation is simple thanks to standard SeaTalkng or NMEA2000 connectivity
    • Setup and calibration of the Follow-On Tiller Controller is easily performed using the system's primary autopilot control head or autopilot-enabled LightHouse 2 or LightHouse 3 Multifunction Display
    • The Follow-On Tiller controller supports both proportional (Full Follow-Up) and bang-bang (Non-Follow-Up) modes for maximum flexibility
      • The controller comes pre-fitted with a return spring to bring the controller back to the 0° center position automatically upon release
      • The return spring can be removed if desired
    • In proportional mode, the rudder follows the tiller precisely, degree for degree, and the rudder returns to amidships whenever the tiller is in its center 0° position
    • In bang-bang mode, the amount of deflection of the tiller controls the speed of rudder travel in the direction signaled
    • Moving the tiller to the center 0° position stops the rudder immediately in position
    • The operator must always manually drive the rudder back to amidships in bang-bang mode.

    Click Here for an Installation Guide for this Product

    Specifications:

    • Steering angle: +/- 35 degrees
    • Mounting option: Surface mount
    • Environment: Above deck to IPX6 and IPX7
    • Power Supply: 12 Volt DC Via SeaTalkng
    • Current Consumption: 30mA (1 LEN)
    • Housing: Front, anodized front panel, with rubberized keypad.
    • Temperature: Operating -25° C to +55° C. Storage temperature -30° C to +70° C
    • Dimensions: 55 mm (Width) x 133 mm (Length) x 13 mm (Height above mounting surface) / 20.4 mm (Height below mounting surface) - Arm length 79.6 mm
    Raymarine Follow-On Tiller Controller for Evolution Autopilots
    532.99
    Status:  null In Stock

     

    rebateEarn up to a $1000 Raymarine Visa Prepaid Card (by mail) when you purchase Raymarine Electronics during the Raymarine Rewards Sales Event.
     

    Package Includes:

    • Follow On Tiller Controller
    • Keymat
    • Outer Bezel
    • 1 meter STNG interconnect cable (A06080)
    • Mounting Hardware
    • Rotary Lever Installation Guide and Documentation kit

    Features:

    • The Raymarine Follow-On Tiller brings fully functional power steering to remote and secondary control stations anywhere onboard
    • Applications: Raymarine Evolution Autopilot Systems installed on powerboats only
      • Raymarine Evolution Autopilot Systems setup with any powerboat profile, which enables access to Power Steer mode
      • It is not compatible with Evolution wheel drive, tiller drive, or linear drive systems configured for sailing vessels
    • Designed for cruising yachts or commercial vessels, the Follow-On Tiller is a simple add-on control unit for Raymarine Evolution autopilot systems
    • With a single button press, the tiller activates Evolution's Power Steer mode, enabling captains to send precise steering angle commands to the rudder, up to 35°
    • The Follow-On Tiller can be installed at bridge wing stations, aft docking stations, or even into the arms of pilothouse helm chairs
      • Designed for surface mount installation into any flat, rigid surface
      • Fully waterproof for above or below-decks mounting
    • Up to (4) Follow-On Tillers can be installed onboard the vessel enabling control from multiple locations
    • Installation is simple thanks to standard SeaTalkng or NMEA2000 connectivity
    • Setup and calibration of the Follow-On Tiller Controller is easily performed using the system's primary autopilot control head or autopilot-enabled LightHouse 2 or LightHouse 3 Multifunction Display
    • The Follow-On Tiller controller supports both proportional (Full Follow-Up) and bang-bang (Non-Follow-Up) modes for maximum flexibility
      • The controller comes pre-fitted with a return spring to bring the controller back to the 0° center position automatically upon release
      • The return spring can be removed if desired
    • In proportional mode, the rudder follows the tiller precisely, degree for degree, and the rudder returns to amidships whenever the tiller is in its center 0° position
    • In bang-bang mode, the amount of deflection of the tiller controls the speed of rudder travel in the direction signaled
    • Moving the tiller to the center 0° position stops the rudder immediately in position
    • The operator must always manually drive the rudder back to amidships in bang-bang mode.

    Click Here for an Installation Guide for this Product

    Specifications:

    • Steering angle: +/- 35 degrees
    • Mounting option: Surface mount
    • Environment: Above deck to IPX6 and IPX7
    • Power Supply: 12 Volt DC Via SeaTalkng
    • Current Consumption: 30mA (1 LEN)
    • Housing: Front, anodized front panel, with rubberized keypad.
    • Temperature: Operating -25° C to +55° C. Storage temperature -30° C to +70° C
    • Dimensions: 55 mm (Width) x 133 mm (Length) x 13 mm (Height above mounting surface) / 20.4 mm (Height below mounting surface) - Arm length 79.6 mm
     
     

     
     

    Have A Suggestion?

     
           
    Defender Email Specials
    Click Here For Our Privacy Policy
     
    null