Oceanic Systems Engine Room Temperature Sensor / Probe

Features:

• The Oceanic Systems 4525 Engine Room Temperature Sensor / Probe is an essential piece of equipment for your vessel
• It is perfect for taking air temperature readings across a variety of locations
• Applications: Attaches to Oceanic Systems 4521 4-Channel Temperature Module (Sold Separately) which monitors up to 4 type K thermocouples and reports their temperature over the NMEA2000® network
• The unit should be attached to the engine room wall or ceiling by using suitable screws through the holes in the metal base
  • Ensure the probe is in a location which has good airflow to obtain an accurate reading
  • The green thermocouple wire should run to the 4521 Module in a protective channel securing it at regular intervals
  • Please note that it is permitted to shorten the green wire if required but it is NOT permitted to extend the wire using ordinary two core cable
    • If it is necessary to extend the wire please use a suitable wire extension piece (Sold Separately)

For further details see Owner's Manual and Installation Guide

For further details see Product Data Sheet

Specifications:

• Operating Voltage: 9 to 32 Volts DC
• Power Consumption: 100mA Average
• Load Equivalence Number: 2 LEN
• Reverse Battery Protection: Yes Indefinitely
• Load Dump Protection: Yes SAE J1113
• Dimensions: 120 mm x 100 mm x 35 mm
• Weight: 160 gm

SAFETY WARNING: This instrument should only be installed by a person competent and experienced in working on electrical systems on boats.