Cart   null      null
Track Orders
Customer Service
My Account
Logo linked to Defender Homepage
Important message
Call or email to speak with our in-house knowledgeable staff.
Phone: 800-628-8225 | Int'l.: 860-701-3400 | Email: Contact Us
promo A
promo B
promo C
promo D
 
 

Jabsco Oil Changer with Multi-Valve Manifold - 24 Volt DC

  • Designed to be Permanently Mounted in a Vessel's Engine Room
  • Manifold: (3) Ball Valves to Serve (3) Different Oil Reservoirs
  • Power: 24 Volts, Draw: 8 Amps
  • Item #: 
    30109401224V
    Brand: 
    Jabsco
    Model #: 

    17820-0024

    Packaged Weight: 
    11.00 Lbs.
    Our Price:
    $559.99
    30109401224V Jabsco Jabsco Oil Changer with Multi-Valve Manifold - 24 Volt DC 17820-0024

    Features:

    • The Jabsco Oil Change System is designed to be installed in a vessel’s engine room with its manifold and valves permanently plumbed to the vessel’s engines’ oil pans or transmissions’ oil sumps
    • The manifold is factory fitted with (3) Ball Valves to serve three different oil reservoirs
      • May be fitted with (2) Additional Ball Valves to drain up to (5) oil reservoirs
    • The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission
    • Each connection to an engine is controlled by a dedicated full flow ball valve
    • The system’s cover provides an attractive appearance, fully shrouding the entire pump and manifold system
    • It also provides added protection against accidental draining of an engine’s oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open
    • Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position

    Specifications:

    • Body: Bronze
    • Impeller: Nitrile
    • Seal: Buna Lip Type
    • Motor: Reversible Permanent Magnet With Integral Reversing Switch
    • Complies with USCG 183.410 and ISO 8846 MARINE (ignition protected)
    • Valves: 1/2" NPT Full Flow Ball Type
    • Height: 6-1/4" (15.9 cm) Including the height of the 1-1/8" (30 cm) tall Switch Guards
    • Length: 10-7/8" (27.6 cm)
    • Width: 10-3/16" (26.0 cm)
    • Available Models:
      • 17820-0024 - 24 Volts, Draw: 8 Amps
      • 17820-0012 - 12 Volts, Draw: 15 Amps

    Click Here to See More Information about this Product

    Jabsco Oil Changer with Multi-Valve Manifold - 24 Volt DC
    559.99
     
    Note:  This item ships from the supplier.
    It typically ships within 2 business days  (more...)
    Status:   null Ships Direct

     
    Shipping is delayed due to the high volume

     

    Features:

    • The Jabsco Oil Change System is designed to be installed in a vessel’s engine room with its manifold and valves permanently plumbed to the vessel’s engines’ oil pans or transmissions’ oil sumps
    • The manifold is factory fitted with (3) Ball Valves to serve three different oil reservoirs
      • May be fitted with (2) Additional Ball Valves to drain up to (5) oil reservoirs
    • The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission
    • Each connection to an engine is controlled by a dedicated full flow ball valve
    • The system’s cover provides an attractive appearance, fully shrouding the entire pump and manifold system
    • It also provides added protection against accidental draining of an engine’s oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open
    • Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position

    Specifications:

    • Body: Bronze
    • Impeller: Nitrile
    • Seal: Buna Lip Type
    • Motor: Reversible Permanent Magnet With Integral Reversing Switch
    • Complies with USCG 183.410 and ISO 8846 MARINE (ignition protected)
    • Valves: 1/2" NPT Full Flow Ball Type
    • Height: 6-1/4" (15.9 cm) Including the height of the 1-1/8" (30 cm) tall Switch Guards
    • Length: 10-7/8" (27.6 cm)
    • Width: 10-3/16" (26.0 cm)
    • Available Models:
      • 17820-0024 - 24 Volts, Draw: 8 Amps
      • 17820-0012 - 12 Volts, Draw: 15 Amps

    Click Here to See More Information about this Product

     
     

     
     

    Have A Suggestion?

     
           
    Defender Email Specials
    Click Here For Our Privacy Policy
    null