Cart   null      null
Track Orders
Customer Service
My Account
Logo linked to Defender Homepage
Important message
Call or email to speak with our in-house knowledgeable staff.
Phone: 800-628-8225 | Int'l.: 860-701-3400 | Email: Contact Us
promo A
promo B
promo C
promo D
 

Marine Systems Air Supply Vent / Grill - 8 Inch x 4 Inch

  • Applications: Designed for Use with Marine Air Conditioning Units
  • Material: Teak, Fixed Blades
  • Size: 8" x 4"
  • Item #: 
    901609ADH8X4
    Brand: 
    Marine Systems Inc
    Model #: 

    VHT8X4

    Packaged Weight: 
    0.65 Lbs.
    List Price: 
    $97.97
    Our Price:
    $59.99
    901609ADH8X4 Marine Systems Inc Marine Systems Air Supply Vent / Grill - 8 Inch x 4 Inch VHT8X4

    Features:

    • Marine Systems Supply Air Vent / Grill
    • Fixed Blades
    • Material: Teak
    • Available Models:
      • 5010233A = 6" x 6"
      • WBCL0040000 8" x 4"

    Important Notes Regarding Onboard AC Systems

    Supply & Return Air Grilles and Transition Boxes
    Install the supply air grille as high as possible in a location that will provide uniform air distribution throughout the cabin. Grille louvers should be directed properly for best air flow. The return air grille should be installed as low and close to the air conditioner as possible to insure direct uninterrupted airflow to the evaporator. The return air grille should have a minimum four inches (4”) of clearance in front of it, free from any furniture or other obstructions. In no instance should a supply air discharge be directed towards a return air grille, as this will cause the system to short cycle. Allow for adequate clearance behind the supply air grille(s) for the transition box and ducting connection.

    Ducting
    Good airflow is critical for the performance of the entire system. It is highly dependent on the quality of the ducting installation. The ducting should be run as straight, smooth and taut as possible minimizing the number of 90 degree bends (two tight 90° bends can reduce airflow by 25%). If a transition box is used, the total area of supply air ducts going out of the box should at least equal the area of the supply duct feeding the box. To calculate the square inch area of a round duct, multiply the radius by itself (r2) and multiply that number by 3.1416(π).

    All Ducting Should:

    • Be insulated and appropriately sized for each application
    • Run as smoothly and taut as possible
    • Have as few bends or loops as possible
    • Be securely fastened to prevent sagging or chafing during vessel operation
    • Have all excess ducting lengths trimmed off
    • Not be flattened or kinked
    • Be properly protected against potential damage when routed through open areas or bulkheads

    Click Here for a Catalog for this Product

    Marine Systems Air Supply Vent / Grill - 8 Inch x 4 Inch
    59.99
     
    Status:    null In Stock

     
    Shipping is delayed due to the high volume

     

    Features:

    • Marine Systems Supply Air Vent / Grill
    • Fixed Blades
    • Material: Teak
    • Available Models:
      • 5010233A = 6" x 6"
      • WBCL0040000 8" x 4"

    Important Notes Regarding Onboard AC Systems

    Supply & Return Air Grilles and Transition Boxes
    Install the supply air grille as high as possible in a location that will provide uniform air distribution throughout the cabin. Grille louvers should be directed properly for best air flow. The return air grille should be installed as low and close to the air conditioner as possible to insure direct uninterrupted airflow to the evaporator. The return air grille should have a minimum four inches (4”) of clearance in front of it, free from any furniture or other obstructions. In no instance should a supply air discharge be directed towards a return air grille, as this will cause the system to short cycle. Allow for adequate clearance behind the supply air grille(s) for the transition box and ducting connection.

    Ducting
    Good airflow is critical for the performance of the entire system. It is highly dependent on the quality of the ducting installation. The ducting should be run as straight, smooth and taut as possible minimizing the number of 90 degree bends (two tight 90° bends can reduce airflow by 25%). If a transition box is used, the total area of supply air ducts going out of the box should at least equal the area of the supply duct feeding the box. To calculate the square inch area of a round duct, multiply the radius by itself (r2) and multiply that number by 3.1416(π).

    All Ducting Should:

    • Be insulated and appropriately sized for each application
    • Run as smoothly and taut as possible
    • Have as few bends or loops as possible
    • Be securely fastened to prevent sagging or chafing during vessel operation
    • Have all excess ducting lengths trimmed off
    • Not be flattened or kinked
    • Be properly protected against potential damage when routed through open areas or bulkheads

    Click Here for a Catalog for this Product

     
     

     
     

    Have A Suggestion?

     
           
    Defender Email Specials
    Click Here For Our Privacy Policy
    null