Sea Hawk Low VOC Tuff Stuff High-Build Epoxy Primer - Lt. Gray

  • Extremely High-Build 2-Part Epoxy Primer that Dries Fast
  • Premium Blister Protection for Fiberglass, Protects Metals from Corrosion
  • Size: (2) 1/2-Gallon Kit (Yields (1) Gallon Mixed), Color: Gray
  • Item #: 
    756657VOCLGY
    Brand: 
    Sea Hawk
    Model #: 

    1286

    Packaged Weight: 
    13.25 Lbs.
    Our Price:
    $104.99
    756657VOCLGY Sea Hawk Sea Hawk Low VOC Tuff Stuff High-Build Epoxy Primer - Lt. Gray 1286

    The Sea Hawk Low VOC Tuff Stuff High-Build Epoxy Primer Kit provides premium blister protection with micro sheet silicate technology. It is a high-build, two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days.

    Features:

    • Premium blister protection with micro sheet silicate technology
    • Highest build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days
    • Using micro sheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration
    • Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water
    • As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal
    • It can be applied at 10-15 mils wet film in one coat, using a brush, roller, airless or conventional spray
    • Fills deep scratches and gouges in a few coats and can be sanded within 8 hours to a smooth finish
    • Available in light gray and white
    • Use over blistered fiberglass as a repair coat, and over un-blistered fiberglass as a barrier coat
    • Protects metals from corrosion, including: aluminum, bronze, stainless steel, cast iron and lead above and below the waterline
    • Excellent for priming props, shafts, keels, trim tabs, thru hulls and lower units

    Specifications:

    • Type: High-build, 2-part epoxy primer
    • Colors: Light gray
    • Finish / sheen: Matte
    • Volume solids: 52% +\- 2%
    • Size: 1-Gallon kit (2 half-gallons)
    • Mix ratio: 1:1
    • Induction time: 20-30 minutes
    • Flash point: 80° F
    • VOC: 280 grams/liter
    • Typical film thickness:
      • Dry: 6 - 7.5 mils per coat
      • Wet: 11.5 - 14.5 mils per coat
    • Recommended coats: 2-4 depending on intended service
    • Theoretical coverage: 140 sq. ft./ Gal. @ 6.0 mils DFT
    • Induction time: 20 - 30 Minutes
    • Pot life: 3 hours
    • Solvent resistant roller cover: 3/8"- 3/16" pile nap (smooth to medium)
    • Dry times and overcoating intervals:
      • Substrate temp / Touch dry / Recoating / Overcoating with bottom paint
        • 73˚F (23˚C) / 2 hours / 3 hours / 6 days / 24 hours
    • Thinning and cleaning: Sea Hawk 2044
    Sea Hawk Low VOC Tuff Stuff High-Build Epoxy Primer - Lt. Gray
    104.99
    Status:   Backordered
    Note: This item will ship when available.

    WarningThis product ships ground only

    The Sea Hawk Low VOC Tuff Stuff High-Build Epoxy Primer Kit provides premium blister protection with micro sheet silicate technology. It is a high-build, two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days.

    Features:

    • Premium blister protection with micro sheet silicate technology
    • Highest build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days
    • Using micro sheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration
    • Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water
    • As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal
    • It can be applied at 10-15 mils wet film in one coat, using a brush, roller, airless or conventional spray
    • Fills deep scratches and gouges in a few coats and can be sanded within 8 hours to a smooth finish
    • Available in light gray and white
    • Use over blistered fiberglass as a repair coat, and over un-blistered fiberglass as a barrier coat
    • Protects metals from corrosion, including: aluminum, bronze, stainless steel, cast iron and lead above and below the waterline
    • Excellent for priming props, shafts, keels, trim tabs, thru hulls and lower units

    Specifications:

    • Type: High-build, 2-part epoxy primer
    • Colors: Light gray
    • Finish / sheen: Matte
    • Volume solids: 52% +\- 2%
    • Size: 1-Gallon kit (2 half-gallons)
    • Mix ratio: 1:1
    • Induction time: 20-30 minutes
    • Flash point: 80° F
    • VOC: 280 grams/liter
    • Typical film thickness:
      • Dry: 6 - 7.5 mils per coat
      • Wet: 11.5 - 14.5 mils per coat
    • Recommended coats: 2-4 depending on intended service
    • Theoretical coverage: 140 sq. ft./ Gal. @ 6.0 mils DFT
    • Induction time: 20 - 30 Minutes
    • Pot life: 3 hours
    • Solvent resistant roller cover: 3/8"- 3/16" pile nap (smooth to medium)
    • Dry times and overcoating intervals:
      • Substrate temp / Touch dry / Recoating / Overcoating with bottom paint
        • 73˚F (23˚C) / 2 hours / 3 hours / 6 days / 24 hours
    • Thinning and cleaning: Sea Hawk 2044
    Documentation available at the following links:

    Scroll to Top of Page