Xantrex Freedom X Power Inverter - 2000 Watts

Features:

• The Xantrex Freedom X Inverter is a true sine wave 120 Vac inverter with built-in transfer switch
• Applications: Recreational and commercial applications
• Premium performance in a lightweight compact package
• It cranks out full output from -4° F - 104° F for operation in all climate temperatures
• The extended surge rating of the Freedom X makes it ideal to start difficult loads including fridge and microwave
• The quick connect terminals at AC IN/OUT make installation a breeze
• Extended Surge Rating Surges to 2X continuous power for 2 seconds for motor loads
• True Sine Wave AC Power For operation of sensitive and motor loads
• Ignition Control Feature to turn inverter on/off via a 12 Volts DC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
• Wide 10-18 Volts DC Input Range Ensures inverter operation on high voltage alternators found on many new vehicle chassis
• Built-in 30 Amp AC Transfer Relay Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator)
  • The unit also automatically switches from invert mode to charge mode
• Quick Installation Huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring

Click Here for an Owner's Manual for this Product

Specifications:

• Electrical
  • Operating Voltage Options 120, 110, 108 Volts AC
  • Continuous Power Continuous Power 2000 Watt @ 40° C True sine wave
  • Continuous Current 16.7 Amp
  • Surge Power 4000 Watt
  • Frequency 60 (or 50) Hz
  • Peak Efficiency 91%
  • Full load Efficiency > 87.5%
  • Operating Voltage Range 85-140 Volts AC
  • Safe Non-Operating Voltage Range Up to 240 Volts AC
• Operating Temperature Range -4 to 140° F (-20 to 60° C), with output derated -4 to 140° F (-20 to 60° C), with output derated above 104° F (40 ° C)
• Storage Temperature Range -40 to 158° F (-40 to 70° C)
• Humidity 5 to 95% RH, non-condensing
• Transfer Relay Rating 30 Amp
• Operating voltage range LBCO voltage - 18.0 Volts DC
• Maximum Non-Operating Voltage 24.0 Volts DC
• Nominal Voltage (Inverting and Charging) 12.0 Volts DC
• Nominal Current at Full Load 192 ADC
• L x W x H 15.4" (390 mm) x 10.8" (275 mm) x 4.0" (102 mm)
• EMC and Safety
  • ETL listed to CSA 107.1 UL458 and UL458 Marine Supplement (drip shield with product number 808-1050 required) ABYC E11, A20, A25, A31

Click Here for an Owner's Manual for this Product