Defender Home Page
Phone: 800-628-8225 Fax: 800-654-1616 Int'l.: 860-701-3400 Email: Contact Us
Shipping Info
no sales tax Defender Home Page
Your Cart


View Cart View Shopping Cart
Check My Order(s)
Track My Package(s)
Metric/Inch
Conversion Chart
Categories
Shopping Areas
Information
Boats & Motors
 Defender Seal
 
Xantrex Freedom XC Power Inverter / Charger
 

Xantrex Freedom XC Power Inverter / Charger

  • True Sine Wave 1000 Watt Inverter with 50 Amp Battery Charger
  • Input: 12 Volt DC, Output: 108 - 120 Volt AC / 1000 Watts Continuous
  • Equipped with Quick-Connect AC Terminals and Ignition Lockout Capability
  • Item #: 
    205038INC1WT
    Brand: 
    Xantrex
    Model #: 
    817-1050
    Shipping Weight: 
    16.40 Lbs.
    $575.00
    575.00
    Status:    In Stock

    Quantity:  
     

     

    Features:

    • The Xantrex Freedom XC Inverter / Charger offers premium performance in a lightweight compact package
    • It cranks out full output in invert or charge mode from -4°F - 104°F for operation in all climate temperatures
    • The extended surge rating of the Freedom XC makes it ideal to start difficult loads including fridge and microwave
    • The quick connect terminals at AC IN/OUT make installation a breeze
    • Inverter Key Features
      • Extended Surge Rating Surges to 2X continuous power for 2 seconds for motor loads
      • True Sine Wave AC Power for operation of sensitive and motor loads
      • Ignition Control Feature to turn inverter on/off via a 12 Volt DC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
      • Wide 10-18 Volt DC Input Range Ensures inverter operation on high voltage alternators found on many new vehicle chassis
      • Programmable AC Under-Voltage (85-110 Volt AC) Shutdown Feature ideal to operate under weak shore power or generator input
      • Built-in 30 Amp AC Transfer Relay Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power
    • Built-in Charger Features
      • Power Factor Corrected Multi-Stage Charging Utilizes less shorepower when charging batteries
        • This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers
      • Programmable Configurable 3-Stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18 Volt
      • Battery Equalization Maximizes flooded battery life
      • Dead Battery Charging Down to 0 Volts DC
      • Power Share Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting

    Click Here for an Owner's Manual for this Product

    Specifications:

    • Electrical Inverter
      • Operating Voltage Options 120, 110, 108 Volts AC
      • Continuous Power Continuous Power 1000 Watt @ 40° C True sine wave
      • Continuous Current 8.4 Amp
      • Surge Power 2000 Watt
      • Frequency 60 (or 50) Hz
      • Peak Efficiency 91%
      • Full load Efficiency > 87.5%
      • Full Load Maximum Current 7 Amp
      • Operating Voltage Range 85-140 Volts AC
      • Safe Non-Operating Voltage Range Up to 240 Volts AC
      • Power Factor at Full Charge > 98%
    • Electrical Specifications - Battery Charger
      • Min Battery Voltage for Charging 0.0 Volt DC
      • Max Output Voltage 18.0 Volt DC (custom battery type)
      • Nominal Output Current User selectable: 5 - 50 Amp
    • Operating Temperature Range -4 to 140° F (-20 to 60° C), with output derated -4 to 140° F (-20 to 60° C), with output derated above 104° F (40 °C)
    • Storage Temperature Range -40 to 158° F (-40 to 70° C)
    • Humidity 5 to 95% RH, non-condensing
    • Transfer Relay Rating 30 Amp
    • Operating voltage range LBCO voltage - 18.0 Volts DC
    • Maximum Non-Operating Voltage 24.0 Volts DC
    • Nominal Voltage (Inverting and Charging) 12.0 Volts DC
    • Nominal Current at Full Load 100 ADC
    • (L x W x H) 14.2" (360 mm) x 10.6" (270 mm) x 3.7" (95 mm)
    • EMC and Safety
      • ETL listed to CSA 107.1 UL458 and UL458 Marine Supplement (drip shield with product number 808-1050 required) ABYC E11, A20, A25, A31
      • This Inverter / Charger is Not Ignition Protected

    Click Here for an Owner's Manual for this Product

     
     

    Xantrex Freedom X / XC Remote Panel
    Item #: 205039
  • Function: Operate and Configure the Freedom X and XC Series Remotely
  • Cutout: 107 mm x 51 mm (Requires 50+ mm Clearance Depth)
  • Includes 25 foot 6-Conductor Cable
  •  Include

    MAP Price
    $60.00

    Model #:
    808-0817-01
    Xantrex Freedom X / XC Series GFCI Outlet
    Item #: 205040
  • Applications: Freedom X and XC Series Remotely
  • Function: Adds Fault Protected Outlet
  • Includes Factory Wired Plug-in Connector
  •  Include

    $22.99

    Model #:
    808-9817
     
     
     

    Have A Suggestion?


    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.

    Product has been improperly categorized
    Page loads too slowly
    Product information is incorrect
    Page has errors or bugs
    Site is frustrating or difficult to use
    Product image is missing or wrong
    Cannot find my size
    Spelling errors on page
    Not enough product information

    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

    Please include your e-mail address below if you would like us to respond to your comments or questions.             





       
    Join Our Email List And Receive our Monthly Promotions
    Defender Email Specials