Item #881400

Sea Hawk Tuff Stuff High-Build Epoxy Primer Kit

00 Review
$68.73 - $201.99
                  Want an email once available?
                  Buy with

                  Image of : Sea Hawk Tuff Stuff High-Build Epoxy Primer Kit Sea Hawk Tuff Stuff High-Build Epoxy Primer Kit Item # 881400

                  Description

                  The Sea Hawk Tuff Stuff High-Build Epoxy Primer Kit provides premium blister protection with micro sheet silicate technology. It is a high-build, two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days.

                  Features:

                  • Premium blister protection with micro sheet silicate technology
                  • High-build, two-part epoxy primer - requires fewer coats
                  • Dries fast, enabling application of a complete barrier system and bottom paint in just two days
                  • Using micro sheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that eliminates any direct path for water migration from moisture and water penetration
                  • Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water
                  • Protects metals from corrosion, including: aluminum, bronze, stainless steel, cast iron and lead above and below the waterline
                  • Excellent for priming props, shafts, keels, trim tabs, thru hulls and lower units
                  • It can be applied at 10-15 mils wet film in one coat, using a brush, roller, airless or conventional spray
                  • Fills deep scratches and gouges in a few coats and can be sanded within 8 hours to a smooth finish
                  • Available in light gray and white
                  • Use over blistered fiberglass as a repair coat, and over un-blistered fiberglass as a barrier coat

                  Specifications:

                  • Type: High-build, 2-part epoxy primer
                  • Colors: White or light gray
                  • Finish/sheen: Matte
                  • Volume solids: 52% +\- 2%
                  • Size: 1-Gallon kit (2 half-gallons) or 1-Quart kit (2 pints)
                  • Mix ratio: 1:1
                  • Induction time: 20 - 30 minutes
                  • Pot life: 3 hours
                  • Flash point: 80° F
                  • VOC: 444 grams/liter
                  • Typical film thickness:
                    • Dry: 6 - 7.5 mils per coat
                    • Wet: 11.5 - 14.5 mils per coat
                  • Recommended coats: 2 - 4 depending on intended service
                  • Theoretical coverage: 140 sq. ft./ Gal. @ 6.0 mils DFT
                  • Induction time: 20-30 minutes
                  • Application: Brush, roller, conventional sprayer, airless sprayer
                  • Solvent resistant roller cover: 3/8"- 3/16" pile nap (smooth to medium)
                  • Dry times and overcoating intervals:
                    • Substrate temp/Touch dry/Recoating/Overcoating with bottom paint
                      • 73°F (23°C)/2 hours/3 hours/6 days/24 hours
                  • Thinning and cleaning: Sea Hawk 2044

                  Technical Data Sheet

                  Application Guidelines

                  Safety Data Sheet

                  WARNING

                  This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.

                  For more information go to www.p65warnings.ca.gov.

                  Part Numbers for Sea Hawk Tuff Stuff High-Build Epoxy Primer Kit

                  Videos

                  Videos

                  Related Categories

                  Related Categories

                  Reviews

                  • bvseo_sdk, p_sdk, 3.2.1
                  • CLOUD, getReviews, 34.44ms
                  • REVIEWS, PRODUCT
                  • bvseo-msg: HTTP status code of 404 was returned;

                  Questions

                  • bvseo_sdk, p_sdk, 3.2.1
                  • CLOUD, getContent, 4.7ms
                  • QUESTIONS, PRODUCT
                  • bvseo-msg: HTTP status code of 404 was returned;