Cart   null      null
Track Orders
Customer Service
My Account
Logo linked to Defender Homepage
Most Orders Placed Mon - Fri by 4:30 PM ET Ship Same Day!
Call or email to speak with our in-house knowledgeable staff.
Phone: 800-628-8225 | Int'l.: 860-701-3400 | Email: Contact Us
promo A
promo B
promo C
promo D
 
 

Rule 500 Electronic Sensing Automatic Bilge Pump - 24 Volts DC 1.0 Amp

  • Flow Rate: 500 GPH, Port Size: 3/4"
  • Nominal Voltage: 24 VDC, Current Draw: 1.0 Amps
  • No Float Switch Required, Computerized Water Sensing
  • Item #: 
    50371024V500
    Brand: 
    Rule
    Model #: 

    25SA-24

    Packaged Weight: 
    0.95 Lbs.
    Our Price:
    $79.99
    50371024V500 Rule Rule 500 Electronic Sensing Automatic Bilge Pump - 24 Volts DC 1.0 Amp 25SA-24

    Features:

    • Ruler 25SA-24 500 GPH Electronic Sensing Automatic Bilge Pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design
    • Rigorous engineering and testing helped generate the new series of bilge pumps
    • Rule pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications
    • Rule's designs include:
      • Higher Flow – optimized impeller to provide greater flow at the same amperage
      • Built-in Thermal Cut-Off (TCO) – provides added protection for pump and vessel
      • Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner
      • Hidden Air Vents in the Body – helps prevent air locking in challenging plumbing installations and helps with the check valve
      • Threaded Discharge - easier installation, easier maintenance
    • The Computerized operation utilized in these pumps operates on the principle of impeller resistance
    • Pump operates automatically by sensing for water
      • Float switches are not required.
      • These pumps will turn on every 2-1/2 minutes for about one second to sense for water
      • If water is present, the pump will sense resistance and continue to run until all water is removed
      • Thereafter, it will check for water every 2-1/2 minutes
      • Power use in the checking mode is minimal
    • Submersible
    • Ignition protected
    • High efficiency, low amp motor
      • Consumes 0.25 Amps per day
    • Non burn-out when dry
    • Stainless Steel shaft
    • Limited three year warranty

    Note: Panel Switches Sold Separately (Panel Switches: 41, 43, 45)

    Click Here for an Owner's Manual and Installation Guide for this Product

    Specifications:

    • Flow Rate: 500 GPH
    • Port Size: 3/4" (discharge outlet)
    • Nominal Voltage: 24 Volt DC
    • Current Draw: 1.0 Amps @ 24 VDC
    • Fuse size: 3 Amp
    • Dimensions: 4.1" H x 2.9" W
    • Panel Switches: 41, 43, 45
    • Replacement Strainer: Model 1231R
    Rule 500 Electronic Sensing Automatic Bilge Pump - 24 Volts DC 1.0 Amp
    79.99
     
    Status:    null In Stock

     
    Shipping is delayed due to the high volume

     

    Features:

    • Ruler 25SA-24 500 GPH Electronic Sensing Automatic Bilge Pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design
    • Rigorous engineering and testing helped generate the new series of bilge pumps
    • Rule pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications
    • Rule's designs include:
      • Higher Flow – optimized impeller to provide greater flow at the same amperage
      • Built-in Thermal Cut-Off (TCO) – provides added protection for pump and vessel
      • Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner
      • Hidden Air Vents in the Body – helps prevent air locking in challenging plumbing installations and helps with the check valve
      • Threaded Discharge - easier installation, easier maintenance
    • The Computerized operation utilized in these pumps operates on the principle of impeller resistance
    • Pump operates automatically by sensing for water
      • Float switches are not required.
      • These pumps will turn on every 2-1/2 minutes for about one second to sense for water
      • If water is present, the pump will sense resistance and continue to run until all water is removed
      • Thereafter, it will check for water every 2-1/2 minutes
      • Power use in the checking mode is minimal
    • Submersible
    • Ignition protected
    • High efficiency, low amp motor
      • Consumes 0.25 Amps per day
    • Non burn-out when dry
    • Stainless Steel shaft
    • Limited three year warranty

    Note: Panel Switches Sold Separately (Panel Switches: 41, 43, 45)

    Click Here for an Owner's Manual and Installation Guide for this Product

    Specifications:

    • Flow Rate: 500 GPH
    • Port Size: 3/4" (discharge outlet)
    • Nominal Voltage: 24 Volt DC
    • Current Draw: 1.0 Amps @ 24 VDC
    • Fuse size: 3 Amp
    • Dimensions: 4.1" H x 2.9" W
    • Panel Switches: 41, 43, 45
    • Replacement Strainer: Model 1231R

    This Pump carries a Five-Year Warranty from the Date of Purchase

     
     

     
     

    Have A Suggestion?

     
           
    Defender Email Specials
    Click Here For Our Privacy Policy
    null