Beckson High-Torque Screw Out Deck Plate / Inspection Port - White
Beckson DP60-CC High-Torque Access Plates are not just for boats! Easily and quickly seal and hide installation holes, instrument panel holes, and other access holes where ready-entry is not a requirement.
Molded of high-impact, marine-quality plastic with ultraviolet inhibitors for prolonged service, the Beckson DP60-CC mounts with only four screws. High-tech matte finish provides a rich looking installation.
The Beckson screw-out plate was designed to provide access without the use of tools, with a single-start, non-jamming, extra-strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water-resistant, even if the gasket is removed. Beckson recommends a screw-out plate be used in compartments where a change in air pressure due to temperature or oil canning can occur.
- In high pressure, near-vacuum conditions, screw-out centers sometimes become difficult to open
- Beckson solved the problem with this watertight high-torque center
- Retains the clarity and toughness of the standard center, but has deeper finger holes and a full pry, raised channel to help seal and unseal the unit
- Not for decks
- Fasteners (6) #8 pan head screws
- OD: 8-1/8" (20.6 cm)
- ID: 6" (15.2 cm)
- Cutout: 6-1/2" (16.5 cm)
Note: Manufacturer recommends using Only Silicone Sealants for ABS deck plate installations and is not liable for product damage caused by other sealants.