Maretron Fuel Flow Sensor - 600 to 6000 LPH

Features:

• Connects to NMEA 2000® network via a Maretron FFM100 Fuel Flow Monitor (FFM100 is required and sold separately)
• Operating principle:
  • Fluid passes through the sensor, turning the rotors 
  • Magnets located in rotors pass across sensors in sensor circuit board
  • Pulses from these sensors are transmitted to the FFM100, which performs flow rate calculations based on received pulses

For further details see Installation Guide with Dimensional Drawings

Specifications:

• Flow Range: 600 to 6000 LPH (158.5 to 1585 GPH)
• Nominal K Factor: 36 pulses / L 136 pulses / Gal)
• Operating Temperature: -40° C to 80° C (-40° F to 186° F)
• Storage Temperature: -65° C to 170° C (-85° F to 338° F)
• Construction
  • Housing Material: Aluminum
  • Rotors: PPS (Ryton)
  • Shafts: 316/304 Stainless Steel
  • Magnets: Samarium Cobalt
  • O-Ring: FKM (Viton)
• Port Size: 1" NPT Female
• Accuracy % Reading: ± 0.25% (With K factor on sensor entered into FFM100)
• Maximum Viscosity: 1000 cPs
• Maximum Operating Pressure: 137.8 Bar (2000 PSI)
• Strainer Size: 60 Mesh (If not already installed after fuel filter)
• Cable Length: 1 meter (3.28 ft)
• Dimensions: 112 mm x 100 mm x 82.2 mm (4.41" x 3.94" x 3.24"
• Weight: 2.015 kg (4.43 lb)