Adler Barbour / Dometic Replacement Thermostat

item on sale
  • Applications: 80 and 100 Series Dometic / Adler Barbour Evaporator Units
  • Mounting: Visible and Accessible Inside or Outside Box
  • Capillary Sensing Tube Must be Inside the Box
  • Item #: 
    402497
    Brand: 
    Dometic ( Adler Barbour )
    Model #: 

    4060204

    Packaged Weight: 
    0.20 Lbs.
    List Price: 
    $50.00
    Reg. Price:
    $44.99
    Sale Price:
    $42.74
    402497
    Adler Barbour / Dometic Replacement Thermostat 4060204

    The Adler Barbour / Dometic Replacement Thermostat is designed for use with the 80 and 100 Series Dometic / Adler Barbour Evaporator Units.

    Features:

    • Adler Barbour Replacement Thermostat
    • Applications: 80 and 100 Series Dometic / Adler Barbour Evaporator Units

    Installation:

    • Mount the thermostatic control unit high in the icebox, away from moisture and spillage
      • It should also be visible and accessible
      • It is acceptable to mount the thermostatic control unit outside of the icebox space if you prefer
      • At least 12 inches / 30.5 cm of capillary sensing tube must be inside the box
    • The capillary sensing tube is 36 inches / 91.4 cm long and must reach from the thermostatic control unit to the clamping plate on the side of the freezer unit
      • It must be routed along the icebox wall, clear of food, shelving, etc.
    • The thermostat can be mounted by using either the adhesive backing on the thermostat mounting flanges or the stainless steel mounting screws (supplied)
      • If using the adhesive backing, the mounting area must be clean and dry
      • Peel off the protective backing from the adhesive foam on both mounting flanges of the thermostatic control unit, position carefully and press firmly to adhere
    • Adler Barbour recommends that you also use the mounting screws by drilling two 9/64 inch /0.36 cm holes through the thermostat flange holes
    Adler Barbour / Dometic Replacement Thermostat
    42.74
    Status:     In Stock

    The Adler Barbour / Dometic Replacement Thermostat is designed for use with the 80 and 100 Series Dometic / Adler Barbour Evaporator Units.

    Features:

    • Adler Barbour Replacement Thermostat
    • Applications: 80 and 100 Series Dometic / Adler Barbour Evaporator Units

    Installation:

    • Mount the thermostatic control unit high in the icebox, away from moisture and spillage
      • It should also be visible and accessible
      • It is acceptable to mount the thermostatic control unit outside of the icebox space if you prefer
      • At least 12 inches / 30.5 cm of capillary sensing tube must be inside the box
    • The capillary sensing tube is 36 inches / 91.4 cm long and must reach from the thermostatic control unit to the clamping plate on the side of the freezer unit
      • It must be routed along the icebox wall, clear of food, shelving, etc.
    • The thermostat can be mounted by using either the adhesive backing on the thermostat mounting flanges or the stainless steel mounting screws (supplied)
      • If using the adhesive backing, the mounting area must be clean and dry
      • Peel off the protective backing from the adhesive foam on both mounting flanges of the thermostatic control unit, position carefully and press firmly to adhere
    • Adler Barbour recommends that you also use the mounting screws by drilling two 9/64 inch /0.36 cm holes through the thermostat flange holes

    Scroll to Top of Page