Honda Marine Fuel Stabilizer & Corrosion Inhibitor for Ethanol Gasoline

Features:

• Genuine Sta-Bil® formula prevents gasoline-related problems during periods of extended storage
• Prevents rust, freezing or gelling of fuel
• Keeps jets and float bowls free of gummy residues
• Equipment stays "ready-to-use"
• Sta-Bil® Fuel Stabilizer Contains powerful cleaning agents to remove gum and varnish build up that rob your engine of power and efficiency
• Protects the entire fuel system against gum, varnish, rust and corrosion
• Eliminates the need to drain fuel tanks before or after storage
• Keeps fuel fresh for quick, easy starts after storage
• Suitable for all 2 and 4 stroke gasoline engines
• The world's top selling fuel stabilizer
• For great performance and protection... YEAR ROUND!
• Whether you own a classic car, a boat, motorcycle, jet ski, mower, chain saw, line trimmer, or anything else that runs on gasoline, if it is used infrequently the fuel in the tank will go stale
• Gasoline begins to deteriorate after little more than a month
• As a general rule, the higher the RON (octane) rating of the fuel, the shorter its storage life will be
• Running stale fuel through your engine can result in difficult starting and reduced performance at best, and at worst you could be looking at a very expensive repair bill
• Treating your fuel with Sta-Bil keeps it fresh for up to 12 months and stops the formation of gum and varnish deposits within the fuel system
• It contains corrosion prevention additives to fight against the damaging effects of Ethanol in fuel and also cleans fuel system components such as fuel injectors and carburetors
• Dosage recommendations:
  • For seasonal storage, or when the fuel is likely to sit idle for more than 1-2 months but less than 12 months: 30 ml for every 9.5 liters of fresh fuel
  • For longer storage periods e.g. 12 - 24 months: 60 ml for every 9.5 liters of fresh fuel
  • For best results always store vehicles and equipment with a full tank of fuel rather than a near empty tank
  • Always run the engine for up to 5 minutes after adding Sta-Bil® to ensure the entire fuel system is treated and not just the fuel stored in the fuel tank