Item #880426

SCAD TM1 Tank Monitor with External Sensor Strip - 10040

00 Review
$186.99
Want an email once available?
Buy with

Image of : SCAD TM1 Tank Monitor with External Sensor Strip - 10040 SCAD TM1 Tank Monitor with External Sensor Strip - 10040 Item # 880426

Description

The SCAD TM1 Tank Monitor with External Sensor Strip is an easy to install solution for monitoring the liquid level in one tank up to 30 inches tall by simply touching a pad. The system uses SCAD's external stick-on level sensors that cannot get fouled and the monitor automatically checks and alerts when liquid levels are critical and provides external alert power. The SCAD TM1 Tank Monitor has the same function, and is compatible with, the 10018 and 10024 sensors and has updated features including:

Features:

  • Monitor water, grey water or holding tank level by simply tapping a touchpad
  • External sensor easily sticks onto the outside of plastic and composite tanks and cannot foul (for water and waste
  • Optional internal sensor available for metal tanks (sold separately)
  • Compatible most fuel float sensors
  • Small footprint: 2.2" x 2.2" x 0.3"
  • Measures up to 9 increments (levels) of liquid
  • Touch pad eliminates button failure
  • Electronics are enclosed
  • Can alarm on empty or full for water and waste tanks
  • External alarm wire can power external device during alarm condition
  • Compact surface mount size 1/2 inch hole required for wires
  • Continuous read function provides hands-free monitoring while filling or emptying tanks
  • Visual alarm that is user selectable on for empty or full
  • Accommodates all tank shapes
  • Easy to install, easy to operate, reliable and cost effective solution for monitoring tank levels
  • Can be used with a variety of sensors

Specifications:

  • Power: 12 / 24V DC
  • Dimensions: 2.2" x 2.2" x 0.3" (56 x 56 x 7.6 mm)
  • Sensor Type:
    • SCAD external sensor for water and waste provided
    • SCAD internal sensor available for metal tanks
    • Monitor is compatible with 240 to 33 Ohm and 10 to 180 Ohm float sensors for fuel
  • Alarm: Visual alarm on empty or full, or no alarm
  • Power wire that provides 1 amp at battery voltage can be set to energize on alarm condition

Data Sheet

Part Numbers for SCAD TM1 Tank Monitor with External Sensor Strip - 10040

Related Categories

Related Categories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 37.07ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

Can I use a 2 wire sensor on this device

Asked by: Ron1
The SCAD TM1 includes a display unit, sensor unit and capactitve strips. There are three wires between the sensor unit and the display unit.
Answered by: Tom G.
Date published: 2024-02-14

How far apart and how close must the sensors be located on the tank?

Asked by: Mac1
Hello, The sensor strips should be positioned 3” to 4” apart on the tank wall; they should also be positioned ½” from the top and bottom of the tank(the installer cuts the foil strips to length, one inch shorter then the tank height).
Answered by: Upwind
Date published: 2024-02-26
  • y_2024, m_3, d_27, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_503845, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_defendermarine
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 52.79ms
  • QUESTIONS, PRODUCT