SCAD TM1 Tank Monitor with External Sensor Strip

The SCAD TM1 Tank Monitor has the same function and is compatible with the 10018 and 10024 sensors and has updated features including:

• Smaller footprint: 2.2" x 2.2" x 0.3"
• Surface mount (1/2 inch hole required for wires)
• Finer level resolution ( 9 vs. 5 increments)
• Touch pad instead of mechanical button eliminates button failure
• Electronics are enclosed vs exposed in previous model
• Can alarm on empty or full for water and waste tanks
• Alarm wire can power external device during alarm condition

Features:

• Monitor water, grey water or holding tank level by simply tapping a touchpad
• Compatible most fuel float sensors
• Compact surface mount size; 1/2 inch hole required for wires
• Continuous read function provides hands-free monitoring while filling or emptying tanks
• External sensor easily sticks onto the outside of plastic and composite tanks and cannot foul (for water and waste
  • Optional internal sensor available for metal tanks (sold separately)
• Visual alarm that is user selectable on for empty or full
• External alarm control wire
• Accommodates all tank shapes
• Easy to install, easy to operate, reliable and cost effective solution for monitoring tank levels
• External sensor eliminates fouling
• Tank level can be continuously viewed while filling or emptying a tank
• Powers external devices during alert conditions
• Small surface mount foot print saves space
• Can be used with a variety of sensors

Specifications:

• Power: 12 / 24 Volt DC
• Dimensions: 2.2" x 2.2" x 0.3" (56 x 56 x 7.6 mm)
• Sensor Type:
  • SCAD external sensor for water and waste provided
  • SCAD internal sensor available for metal tanks
  • Monitor is compatible with 240 to 33 Ohm and 10 to 180 Ohm float sensors for fuel
• Alarm: Visual alarm on empty or full, or no alarm
• Power wire that provides 1 amp at battery voltage can be set to energize on alarm condition