Defender Home Page
Call or email to speak with our In-House Technical Staff/Advisors
Phone: 800-628-8225 Int'l.: 860-701-3400 Email: Contact Us
Follow us on Facebook
Shipping Info
Defender Home Page
Your Cart
null
null
null View Cart View Shopping Cart
null Check My Order(s)
null Track My Package(s)
Metric/Inch
Conversion Chart
Categories
Shopping Areas
Information
Boats & Motors
null Defender Seal null
promo A
promo B
promo C
promo D
 
West System 206 Slow Hardener - 7 Ounces
 
 

West System 206 Slow Hardener - 7 Ounces

  • Formulated for Use with 105 Epoxy Resin, Mix Ratio*
  • Extends Working and Cure Times When Working at Higher Temperatures
  • Size: 7 fl. oz. (206 ml)
  • Item #: 
    750366
    Brand: 
    West System
    Model #: 

    206-A

    Packaged Weight: 
    0.60 Lbs.
    List Price: 
    $22.62
    Our Price:
    $21.99
    750366 West System West System 206 Slow Hardener - 7 Ounces 206-A

    West System 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures.

    Features:

    • 105 / 206 mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties
    • Wets out and bonds to wood fiber, fiberglass, reinforcing fabrics, foam and other composite materials, as well as a variety of metals
    • 105 / 206 Epoxy can be thickened with West System fillers to bridge gaps and fill voids and can be sanded and shaped when cured
    • With roller applications, has excellent thin-film characteristics, allowing it to flow out and self-level without "fish-eyeing"
    • Multiple coats of 105 / 206 create a superior moisture barrier and a tough, stable base for paints and varnishes
    • Formulated without volatile solvents
    • Has a relatively high flash point, no strong solvent odor and does not shrink after curing
    • It is not intended for clear coating natural finished wood

    Handling characteristics:

    • Mix ratio: (5) parts resin : (1) part hardener
    • Pot life at 72°F (22°C): 20 to 25 minutes
    • Cure to solid state: 10 to 15 hours
    • Cure to maximum strength: 1 to 4 days
    • Minimum recommended temperature for curing: 60°F (16°C)

    For further details See Data Sheet for This Product

    * Dispensing and Mixing

    • Dispense the proper proportions of resin and hardener into a clean plastic, metal or wax-free paper container
    • Don't use glass or foam containers because of the potential danger from exothermic heat buildup
    • DO NOT attempt to adjust the epoxy cure time by altering the mix ratio
      • An accurate ratio is essential for a proper cure and full development of physical properties
    • Dispensing with Mini pumps
        • Most problems related to curing of the epoxy can be traced to the wrong ratio of resin and hardener
        • To simplify metering, we recommend using calibrated WEST SYSTEM Mini Pumps to dispense the resin and hardener
        • Mini Pumps are calibrated to deliver the proper working ratio of resin to hardener
        • Pump one full pump stroke of resin for each one full pump stroke of hardener
        • Depress each pump head fully and allow the head to come completely back to the top before beginning the next stroke
      • Partial strokes will give the wrong ratio
      • Read the pump instructions before using pumps
      • Before you use the first mixture on a project, verify the proper ratio according to the instructions that come with the pumps
      • Re-check the ratio anytime you experience problems with curing
    • Dispensing without Mini Pumps (Weight/volume measure):
      • To measure 105 Resin and 205 or 206 Hardener by weight or volume, combine five parts resin with one part hardener
      • To measure 105 Resin and 207 or 209 Hardener by volume, combine three parts resin with one part hardener (by weight, 3.5 parts resin-1 part hardener)
    West System 206 Slow Hardener - 7 Ounces
    21.99
    Status:  null In Stock

     

    shipping delay

     

    Warning This product ships ground only


    West System 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures.

    Features:

    • 105 / 206 mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties
    • Wets out and bonds to wood fiber, fiberglass, reinforcing fabrics, foam and other composite materials, as well as a variety of metals
    • 105 / 206 Epoxy can be thickened with West System fillers to bridge gaps and fill voids and can be sanded and shaped when cured
    • With roller applications, has excellent thin-film characteristics, allowing it to flow out and self-level without "fish-eyeing"
    • Multiple coats of 105 / 206 create a superior moisture barrier and a tough, stable base for paints and varnishes
    • Formulated without volatile solvents
    • Has a relatively high flash point, no strong solvent odor and does not shrink after curing
    • It is not intended for clear coating natural finished wood

    Handling characteristics:

    • Mix ratio: (5) parts resin : (1) part hardener
    • Pot life at 72°F (22°C): 20 to 25 minutes
    • Cure to solid state: 10 to 15 hours
    • Cure to maximum strength: 1 to 4 days
    • Minimum recommended temperature for curing: 60°F (16°C)

    For further details See Data Sheet for This Product

    * Dispensing and Mixing

    • Dispense the proper proportions of resin and hardener into a clean plastic, metal or wax-free paper container
    • Don't use glass or foam containers because of the potential danger from exothermic heat buildup
    • DO NOT attempt to adjust the epoxy cure time by altering the mix ratio
      • An accurate ratio is essential for a proper cure and full development of physical properties
    • Dispensing with Mini pumps
        • Most problems related to curing of the epoxy can be traced to the wrong ratio of resin and hardener
        • To simplify metering, we recommend using calibrated WEST SYSTEM Mini Pumps to dispense the resin and hardener
        • Mini Pumps are calibrated to deliver the proper working ratio of resin to hardener
        • Pump one full pump stroke of resin for each one full pump stroke of hardener
        • Depress each pump head fully and allow the head to come completely back to the top before beginning the next stroke
      • Partial strokes will give the wrong ratio
      • Read the pump instructions before using pumps
      • Before you use the first mixture on a project, verify the proper ratio according to the instructions that come with the pumps
      • Re-check the ratio anytime you experience problems with curing
    • Dispensing without Mini Pumps (Weight/volume measure):
      • To measure 105 Resin and 205 or 206 Hardener by weight or volume, combine five parts resin with one part hardener
      • To measure 105 Resin and 207 or 209 Hardener by volume, combine three parts resin with one part hardener (by weight, 3.5 parts resin-1 part hardener)
     
     


    West System Resin Mini Pumps Set
    Item #: 754429
  • One Set For Groups A, B, C, Mix Ratio*
  • One resin pump and two hardener pumps
  • Sold as a Set of (3) Pumps
  •  
    null
    $15.99
    Model #:
    300
     
     
     

    Have A Suggestion?


    This form is intended to improve the current product page. For Customer Service, please click here

    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.










    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

                





           
    Defender Email Specials
    Click Here For Our Privacy Policy
     
    null