Rule Marine In-Line Blower - 3 Inch 24 Volt DC

  • Output: 134 CFM, Duct Connection Inside Diameter: 3" (75 mm), Mount: Surface
  • Power: 24 Volt DC, Draw:1.8 Amp, Ignition Protected
  • Dimension: 76 x 127 x 81 (mm)
  • Item #: 
    90181624V3PO
    Brand: 
    Rule
    Model #: 

    140-24V

    Packaged Weight: 
    0.95 Lbs.
    Our Price:
    $46.99
    90181624V3PO Rule Rule Marine In-Line Blower - 3 Inch 24 Volt DC 140-24V

    The 3" Rule In-line Blowers provide ventilation for bilges, engine compartments, galleys and heads. Compact and easily installed on any flat surface, Rule in-line blowers provide higher air flow, lower amp draw and quieter operation than standard blowers.

    Features:

    • Provides ventilation for bilges, engine compartments, galleys and heads
    • Compact and easily installed on any flat surface
    • Quieter operation than standard blowers
    • Designed for efficient, high output operation
    • Heavy duty corrosion resistant nickel-packed motor for long life
    • Sealed motor shaft for moisture protection
    • Slip-on inlet and outlet ducting connections
    • Patented stiffening ring design for high temperature structural integrity
    • ISO 9097 MARINE (electric fans)
    • USCG, 183.410 compliant; ignition protected
    • ABYC - H2 (Ventilation of boats using gasoline); N.M.M.A. type accepted

    Specifications:

    • Ducting (inches/mm): 3" (76 mm)
    • Voltage: 24 Volts DC
    • CFM @ open flow: 134
    • Amp draw: 1.8
    • Fuse size (amps): 2.5
    Rule Marine In-Line Blower - 3 Inch 24 Volt DC
    46.99
    Status:     In Stock

    The 3" Rule In-line Blowers provide ventilation for bilges, engine compartments, galleys and heads. Compact and easily installed on any flat surface, Rule in-line blowers provide higher air flow, lower amp draw and quieter operation than standard blowers.

    Features:

    • Provides ventilation for bilges, engine compartments, galleys and heads
    • Compact and easily installed on any flat surface
    • Quieter operation than standard blowers
    • Designed for efficient, high output operation
    • Heavy duty corrosion resistant nickel-packed motor for long life
    • Sealed motor shaft for moisture protection
    • Slip-on inlet and outlet ducting connections
    • Patented stiffening ring design for high temperature structural integrity
    • ISO 9097 MARINE (electric fans)
    • USCG, 183.410 compliant; ignition protected
    • ABYC - H2 (Ventilation of boats using gasoline); N.M.M.A. type accepted

    Specifications:

    • Ducting (inches/mm): 3" (76 mm)
    • Voltage: 24 Volts DC
    • CFM @ open flow: 134
    • Amp draw: 1.8
    • Fuse size (amps): 2.5
    CA Prop65 warning

    Scroll to Top of Page