Rule 800 Electronic Sensing Automatic Bilge Pump

Flow Rate: 800 GPH, Port Size: 3/4"

Nominal Voltage: 12 VDC, Current Draw: 1.6 Amps

No Float Switch Required, Computerized Water Sensing

Item #:

50371012V800

Brand:

Rule

Model #:

20SA

Packaged Weight:

1.10 Lbs.

Our Price:

$119.99

50371012V800 Rule Rule 800 Electronic Sensing Automatic Bilge Pump 20SA

Features:

Rule 20SA 800 GPH Electronic Sensing Automatic Bilge Pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design
Rigorous engineering and testing helped generate the new series of bilge pumps
Rule pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications
Rule's designs include:
- Higher Flow – optimized impeller to provide greater flow at the same amperage
- Built-in Thermal Cut-Off (TCO) – provides added protection for pump and vessel
- Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner
- Hidden Air Vents in the Body – helps prevent air locking in challenging plumbing installations and helps with the check valve
- Threaded Discharge - easier installation, easier maintenance
The Computerized operation utilized in these pumps operates on the principle of impeller resistance
Pump operates automatically by sensing for water
- Float switches are not required.

These pumps will turn on every 2-1/2 minutes for about one second to sense for water
If water is present, the pump will sense resistance and continue to run until all water is removed
Thereafter, it will check for water every 2-1/2 minutes
Power use in the checking mode is minimal

Note: Panel Switches Sold Separately (Panel Switches: 41, 43, 45)

Specifications:

https://www.defender.com/product.jsp?id=4067480

Status:

In Stock

Quantity:

Description

Features:

Rule 20SA 800 GPH Electronic Sensing Automatic Bilge Pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design
Rigorous engineering and testing helped generate the new series of bilge pumps
Rule pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications
Rule's designs include:
- Higher Flow – optimized impeller to provide greater flow at the same amperage
- Built-in Thermal Cut-Off (TCO) – provides added protection for pump and vessel
- Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner
- Hidden Air Vents in the Body – helps prevent air locking in challenging plumbing installations and helps with the check valve
- Threaded Discharge - easier installation, easier maintenance
The Computerized operation utilized in these pumps operates on the principle of impeller resistance
Pump operates automatically by sensing for water
- Float switches are not required.

These pumps will turn on every 2-1/2 minutes for about one second to sense for water
If water is present, the pump will sense resistance and continue to run until all water is removed
Thereafter, it will check for water every 2-1/2 minutes
Power use in the checking mode is minimal

Note: Panel Switches Sold Separately (Panel Switches: 41, 43, 45)

Specifications:

Rule Pumps Carry a Three-Year Warranty from the Date of Purchase