Note :11 available to ship. Additional quantities not available at this time. 11 LEFT!
Buy Now While this Item is Still Available!

Rule 500 Electronic Sensing Automatic Bilge Pump - 24 Volts DC 1 Amp

Flow Rate: 500 GPH, Port Size: 3/4"

Nominal Voltage: 24 VDC, Current Draw: 1.0 Amps

No Float Switch Required, Computerized Water Sensing

Item #:

50371024V500

Brand:

Rule

Model #:

25SA-24

Packaged Weight:

0.95 Lbs.

Our Price:

$89.99

50371024V500 Rule Rule 500 Electronic Sensing Automatic Bilge Pump - 24 Volts DC 1 Amp 25SA-24

Features:

Ruler 25SA-24 500 GPH Electronic Sensing Automatic Bilge Pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design
Rigorous engineering and testing helped generate the new series of bilge pumps
Rule pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications
Rule's designs include:
- Higher Flow – optimized impeller to provide greater flow at the same amperage
- Built-in Thermal Cut-Off (TCO) – provides added protection for pump and vessel
- Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner
- Hidden Air Vents in the Body – helps prevent air locking in challenging plumbing installations and helps with the check valve
- Threaded Discharge - easier installation, easier maintenance
The Computerized operation utilized in these pumps operates on the principle of impeller resistance
Pump operates automatically by sensing for water
- Float switches are not required.

These pumps will turn on every 2-1/2 minutes for about one second to sense for water
If water is present, the pump will sense resistance and continue to run until all water is removed
Thereafter, it will check for water every 2-1/2 minutes
Power use in the checking mode is minimal

Note: Panel Switches Sold Separately (Panel Switches: 41, 43, 45)

Specifications:

https://www.defender.com/product.jsp?id=4069067

Status:

In Stock

Quantity:

Description

Features:

Ruler 25SA-24 500 GPH Electronic Sensing Automatic Bilge Pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design
Rigorous engineering and testing helped generate the new series of bilge pumps
Rule pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications
Rule's designs include:
- Higher Flow – optimized impeller to provide greater flow at the same amperage
- Built-in Thermal Cut-Off (TCO) – provides added protection for pump and vessel
- Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner
- Hidden Air Vents in the Body – helps prevent air locking in challenging plumbing installations and helps with the check valve
- Threaded Discharge - easier installation, easier maintenance
The Computerized operation utilized in these pumps operates on the principle of impeller resistance
Pump operates automatically by sensing for water
- Float switches are not required.

These pumps will turn on every 2-1/2 minutes for about one second to sense for water
If water is present, the pump will sense resistance and continue to run until all water is removed
Thereafter, it will check for water every 2-1/2 minutes
Power use in the checking mode is minimal

Note: Panel Switches Sold Separately (Panel Switches: 41, 43, 45)

Specifications:

Rule Pumps Carry a Three-Year Warranty from the Date of Purchase