Rule 500 Submersible Non-Automatic Bilge Pump - 12 Volts DC 1.6 Amp
Rule 500 Submersible Non-Automatic Bilge Pump - 12 Volts DC 1.6 Amp
Rule 500 Submersible Non-Automatic Bilge Pump - 12 Volts DC 1.6 Amp

Rule 500 Submersible Non-Automatic Bilge Pump - 12 Volts DC 1.6 Amp

  • Flow Rate: 500 GPH, Port Size: 3/4"
  • Power: 12 Volt DC, Draw: 1.6 Amp @ 12 Volt
  • Pump Activated by Separate Float Switch (Sold Separately)
    • Item #: 
    50371112V500
    Brand: 
    Rule
    Model #: 

    25DA

    Packaged Weight: 
    0.90 Lbs.
    Our Price:
    $37.99
    50371112V500
    Rule 500 Submersible Non-Automatic Bilge Pump - 12 Volts DC 1.6 Amp 25DA

    Rule's Submersible Non-Automatic Bilge Pump provides a very high output, low amp draw and an easy to install design for the lowest part of your vessel's bilge.

    Features:

    • Includes a check valve to prevent back-flow into the bilge
      • Back flow prevention comes standard means less water in the bilge, less pump cycling
      • Rule has created a hidden air vent to prevent airlocking
      • Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks
      • Higher flow
        • 500 GPH means true 500 GPH at 12 volts
        • Others require 13.6 volts to pump at their rated volume
      • Built-in thermal cell protects the pump and the vessel if things get too hot
    • True electromagnetic suppression (EMC)
    • Built-in thermal cell that protects the pump from overheating
    • Require a separate float, or other, activation switch for operation
    • Non-automatic - used with a panel switch or Rule float switch
    • Submersible
    • Ignition protected
    • High efficiency, low amp motor
    • Stainless-steel shaft
    • Includes backflow preventer

    Specifications:

    • GPH / LPH: 500 / 1890
    • Power: 12 Volts DC
    • Draw: 1.6 Amps @ 12 volts DC
    • Check valve and fittings included
    • Hose diameter: 3/4" (19 mm)
     Rule 500 Submersible Non-Automatic Bilge Pump - 12 Volts DC 1.6 Amp
    37.99
    See All Pumps See All Rule Products View Similar Items
    Status:     In Stock

    Rule's Submersible Non-Automatic Bilge Pump provides a very high output, low amp draw and an easy to install design for the lowest part of your vessel's bilge.

    Features:

    • Includes a check valve to prevent back-flow into the bilge
      • Back flow prevention comes standard means less water in the bilge, less pump cycling
      • Rule has created a hidden air vent to prevent airlocking
      • Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks
      • Higher flow
        • 500 GPH means true 500 GPH at 12 volts
        • Others require 13.6 volts to pump at their rated volume
      • Built-in thermal cell protects the pump and the vessel if things get too hot
    • True electromagnetic suppression (EMC)
    • Built-in thermal cell that protects the pump from overheating
    • Require a separate float, or other, activation switch for operation
    • Non-automatic - used with a panel switch or Rule float switch
    • Submersible
    • Ignition protected
    • High efficiency, low amp motor
    • Stainless-steel shaft
    • Includes backflow preventer

    Specifications:

    • GPH / LPH: 500 / 1890
    • Power: 12 Volts DC
    • Draw: 1.6 Amps @ 12 volts DC
    • Check valve and fittings included
    • Hose diameter: 3/4" (19 mm)

    Rule Pumps Carry a Three-Year Warranty from the Date of Purchase

    Documentation available at the following links:

    Scroll to Top of Page