Jabsco Radial Flexmount Ventilation Blower - 4 Inch 12 Volt DC, 250 CFM
Jabsco Radial Flexmount Ventilation Blower - 4 Inch 12 Volt DC, 250 CFM
Jabsco Radial Flexmount Ventilation Blower - 4 Inch 12 Volt DC, 250 CFM
Actual Blower May Vary Slightly from Image Shown

Jabsco Radial Flexmount Ventilation Blower - 4 Inch 12 Volt DC, 250 CFM

  • Output: 250 CFM, Duct Connection: 4" (100 mm), Mount: Flexmount
  • Power: 12 Volt DC, Draw: 12 Amps, Ignition Protected
  • Dimension: 9-3/16" L x 9-1/8" W x 9-5/8" H
  • Item #: 
    90181925012V
    Brand: 
    Jabsco
    Model #: 

    35440-0000

    Packaged Weight: 
    6.60 Lbs.
    Our Price:
    $216.99
    90181925012V Jabsco Jabsco Radial Flexmount Ventilation Blower - 4 Inch 12 Volt DC, 250 CFM 35440-0000

    The 4" Jabsco Flexmount Blowers provide high volume air intake or extraction and are primarily intended for intermittent duty cycles. This type of mount enables the outlet to adjust 360-degrees.

    Features:

    • Provides high volume air intake or extraction
    • Primarily intended for intermittent duty cycles
      • May be used for longer duty cycles but the maximum motor life is approximately 1,000 hours
    • Flexmount allows 360-degree adjustable outlet
    • Slip-on inlet and outlet ducting connections
    • Dimensionally stable, quiet running Delrin rotors
    • Corrosion resistant materials throughout
    • Ignition protected: DC models comply with USCG 183.410 and ISO 8846 MARINE
    • DC models are listed as NMMA type Accepted and comply with ISO 9097 MARINE (requirements for measuring airflow of fans intended for use in engine compartments, similar spaces)
    • Jabsco recommends keeping blowers away from areas exposed to direct heat exceeding 130°F (55°C)

    Specifications:

    • Open airflow: 250 cubic feet per minute
    • Duct connection: 4 Inches
    • Voltage: 12 VDC
    • Amperage: 12 Amps
    • Fuse size: 15 Amps
    • Weight: 6 lbs. (2.7 kg)

    For more information, see Data Sheet

    Jabsco Radial Flexmount Ventilation Blower - 4 Inch 12 Volt DC, 250 CFM
    216.99
    Status:     In Stock

    The 4" Jabsco Flexmount Blowers provide high volume air intake or extraction and are primarily intended for intermittent duty cycles. This type of mount enables the outlet to adjust 360-degrees.

    Features:

    • Provides high volume air intake or extraction
    • Primarily intended for intermittent duty cycles
      • May be used for longer duty cycles but the maximum motor life is approximately 1,000 hours
    • Flexmount allows 360-degree adjustable outlet
    • Slip-on inlet and outlet ducting connections
    • Dimensionally stable, quiet running Delrin rotors
    • Corrosion resistant materials throughout
    • Ignition protected: DC models comply with USCG 183.410 and ISO 8846 MARINE
    • DC models are listed as NMMA type Accepted and comply with ISO 9097 MARINE (requirements for measuring airflow of fans intended for use in engine compartments, similar spaces)
    • Jabsco recommends keeping blowers away from areas exposed to direct heat exceeding 130°F (55°C)

    Specifications:

    • Open airflow: 250 cubic feet per minute
    • Duct connection: 4 Inches
    • Voltage: 12 VDC
    • Amperage: 12 Amps
    • Fuse size: 15 Amps
    • Weight: 6 lbs. (2.7 kg)

    For more information, see Data Sheet

    CA Prop65 warning

    Scroll to Top of Page